Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

OT need help with table saw

Posts

OT need help with table saw

#1

OT need help with table saw

Stacey S

>My wife found a plan to make some wooden quilt squares. They involve individual pieces of wood cut into shapes to look like quilt patterns. Anyway I am trying to figure out how to accurately get the triangles cut. Can someone suggest how I need to do this. They are 90deg triangles with the long side being 2.5" long and the short sides approx 1.25". HELP!

Stacey

Re: OT need help with table saw

#2

Re: OT need help with table saw

jwoodwright

>Stacey,

Think segmented turning. You make your strips of each wood the correct thickness and width. Then with a sled mounted on your table saw, make a fixed fence to give you the proper angle for the cut-off. You should be able to add a stop to get correct length.

Or, use a power miter saw and cut pieces, after you make the correct size strips.

Whichever method, use a good blade with at least 80 teeth. I have a Rigid Brand that gaurentee's no sanding.

Sandpaper glued to the sled fence stops "creep"...

Take care and be safe. John K.