Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Five boxes

Posts

Five boxes

#1

Five boxes

Ed Moore in SW Virginia

>Here are five boxes that I have made recently. The tallest is the ash box dyed black and limed on the left. It is 4 5/16" high. The curly maple box with the Macassar ebony insert belongs to Clay Johnson of Choice Woods. I love the chatoyance of the maple that I got from Clay. A piece of tulipwood has been screaming at me for months, "There's a Richard Raffan mosque box in here!", and I finally heeded that call and made this box. The black and white ebony box, "Standing Tall", goes to Mark Mandell, or to John C Campbell Folk School for their August fundraiser, TBD.

Ed


img

Re: Five boxes

#2

Mike Stafford

Re: Five boxes

Mike Stafford

>Ed, you haven't lost your touch. All are lovely but I think my favorites are the Raffanette in tulipwood (I love tulipwood) and the curly maple box with the ebony insert. The maple does have some lovely curl.

That said I also have become enamored with the dye jobs you are doing on the ash boxes. I don't have any ash but I might try that on some oak which I do have plenty of and resist turning because of how plain it is. Do you think that treatment will work as well on the oak?

Pretty work, Ed!!

Re: Five boxes

#3

Re: Five boxes

Ed Moore in SW Virginia

>Mike,

I think that oak will work extremely well if you put enough dye on it. Don Riggs suggested that after dyeing the piece, one should give it a light spray of lacquer to seal it, and that really helps. That way, when you put the liming wax on it there is almost no bleeding. Black can become blue if one doesn't seal it. The liming wax instructions say that after liming one should give it a coat of clear wax. That step is extremely important and satisfying. It really sharpens the appearance.

I like the tulipwood box and Clay's maple with the Macassar ebony. I am considering getting more of the maple for the JCCFS class. The black and white ebony box is much nicer than the picture suggests.

Thanks,

Ed


img

Re: Five boxes

#4

Re: Five boxes

keith zimmerman, Normal IL

>Ed, I really like these boxes. The dyed and lime boxes are sweet. I have been doing the same technique and enjoy the look. I have found that in some cases I like the sheen the liming wax leaves on it's own, but I have also buffed them with carnuba was on my Beall wheel. Gives it a nice shine.

I want to try the technique on some oak and walnut I have. Both should take on an interesting appearance with the dye and liming.

spin on

keithz

Re: Five boxes

#5

Steven Antonucci

It was my favorite of the bunch as well

steve antonucci

>

Re: Five boxes

#6

Yeah, But

Mark Mandell - Gone Round In Jersey

>It's MIN-N-N-N-N-N-N-NE!!!!!!

|;-}}}}}}}}}

[And thank you, Ed!!! PM on it's way.]

Re: Five boxes

#7

"Standing Tall" is on its way ...

Ed Moore in SW Virginia

>to NJ via the USPS Priority Service. It should arrive Monday or Tuesday.

When it might have been easy to choose a different course, you chose to stand tall and be a man. Thank you. The contrast of the wood suggests the contrast of views expressed.

I hope that you enjoy it.

Ed

Re: Five boxes

#8

Re: Five boxes

Ron McKinley

>Beautiful shapes, styles and wood. Great work! .....Ron

Re: Five boxes

#9

Keith, I have tried ...

Ed Moore in SW Virginia

>different color dyes on tool handles, but I didn't lime them. Have you tried other colors than black with liming?

Thanks, good to hear from you.

Ed

Re: Five boxes

#10

Thanks, Ron. I am trying to ...

Ed Moore in SW Virginia

>turn as many different boxes as possible before we head for John C Campbell. You never know what you will be requested to demonstrate. [grin]

Ed

Re: Five boxes

#11

I've tried other colors.

john lucas

>I have used black, gold, copper and silver waxes and then used different color analine dyes over them. I love red with black wax. My favorite for mahagony is to dye the wood red and then use Cordavan shoe polish. It looks like a rich mahagony.

By the way Ed I like the one on the right the best but it think it would be harder to choose if I had them in my hand. I like the feel of boxes as well as how they look.

Re: Five boxes

#12

John, I plan to teach that style ...

Ed Moore in SW Virginia

>box at JCCFS. You said that you might stop over when Mike Stafford and I are there. We are hoping that you do that.

Ed

Re: Five boxes

#13

Re: John, I plan to teach that style ...

john lucas

>Ed I took Monday off from work and will drive up from Atlanta unless something odd comes up. I will be taking a Ray Key workshop next week and I plan to make some new boxes. I will bring them unless someone offers me enough money to pry them out of my hands. I look forward to seeing you both.

Re: Five boxes

#14

Re: Five boxes

Jim Shaver - Oakville, Ont

>Nicely Done Ed,

I love boxes, they are so fun to make, I enjoy looking at your work anytime my friend,

Take care,

Jim

Re: Five boxes

#15

Re: "Standing Tall" is on its way ...

Mark Mandell - Gone Round In Jersey

>To stand next to Jake Brubaker's saffron box.

Re: Five boxes

#16

Re: I would love to join you guys.......

Jamie Donaldson

>.....at the Folk School for the week, but I'm teaching a continuing class at the new Woodcraft in Lexington KY 4 weekends in August-dangit!! I haven't made boxes in years since taking a Ray Key class at Arrowmont, and it would be great fun to renew my interest and skills with ya'll. Mike Stafford did a great job with the Wed. night turning demo at Folk School during my class in March, so make him work hard, and don't let him play with any sharp carving chisels!

Re: Five boxes

#17

On Monday we will be doing sea ...

Ed Moore in SW Virginia

>urchin ornaments. But I will have boxes there, as will Mike, and we can certainly show them to the class to whet their appetite.

I plan to teach acorn ornaments and then slide over to acorn boxes, and on into boxes with inset lids and then "regular" boxes.

As Jamie suggested, we will try to keep the sharp tools hidden from Mike Stafford.

It's going to be a great week. Frank Penta, Mike Hunter, Dennis Yoder, and John K Jordan will be there, as well as some folks I don't know yet.

Ed

Ed

Re: Five boxes

#18

Re: Five boxes

Ed Moore in SW Virginia

>Jim,

It's good to hear from you. How have you been?

I saw a mutual friend in Richmond. I hope that things worked out to your satisfaction.

Ed

Re: Five boxes

#19

Jamie, we would love to have you ...

Ed Moore in SW Virginia

>there, but sometimes we can't pick all the flowers and we must do what we must do.

This promises to be an interesting group.

The invitation to visit Carolyn and me stands and is open-ended. Whenever ...

Ed

Re: Five boxes

#20

Mike Stafford

I'll have my kevlar gloves this time....

Mike Stafford

>

Re: Five boxes

#21

Re: Keith, I have tried ...

keith zimmerman, Normal IL

>I've only tried blue, but I have several other colors that will probably be tried in the future. The liming wax actually picked up the blue in spite of using a lacquer sealer, so the grain shows as a very light blue. I think it looks interesting.

keithz

Re: Five boxes

#22

Re: On Monday we will be doing sea ...

John K Jordan

>I'm certainly looking forward to it. I haven't had time to turn all summer so I'll probably have to start over again and learn which end of the tool to hold.

I hope you won't be disappointed if I'm not that interested in urchin ornaments - I'm mostly interested in boxes!

Should we bring wood? Our favorite skew? Spare chucks?

JKJ

Re: Five boxes

#23

John, the first order of business ...

Ed Moore in SW Virginia

>Sunday evening is to identify what each student hopes to get from the course. Depending upon the background of several names that I don't recognize, we might begin by making 1/4" round skews. I also plan to bring enough round skews that I have made so that if folks would rather purchase them then we can move on. The next part is to learn to make the icicles for ornaments. No matter what the desired end result is, learning this skew work and spindle gouge work is a real skill builder. If someone wants to make lots of ornaments and the rest of the group wants to focus on boxes, then I have a plan to accommodate that. With boxes and ornaments on the agenda, it could be a 2 - 3 split or a 3 - 2 split, depending on the interests of the group. Learning to make an acorn ornament and then an acorn box is a simple transition and the skills are essentially the same. The problem will be trying to get ten pounds into a five pound bag. [grin]

I plan to provide the wood. Please do NOT bring exotics like cocobolo for boxmaking. Some member of the class may be allergic to the exotics and I would not want to spoil the week for anyone by exposing them to dust that sets off their allergies. I will have maple, cherry, and walnut. We will have purpleheart for certain urchin ornament icicles, but I am not aware of purpleheart being a problem wood.

Ed

Re: Five boxes

#24

Re: Five boxes

Jim Shaver - Oakville, Ont

>Hi Ed,

I have been doing great, I am back in my shop busy making furniture and a few pens. The last few years were a struggle with my chronic hip pain, but since my replacement(resurfacing)last fall and a long winter passing I am seeing the light and emerging back into my Zone..it was not simple and I struggled to be honest, but I am getting my vision back and I feel good again.

Yes,, I heard...:-) Things are doing well, very well thank you!

take care,

Jim

I always enjoy your work my friend, even if I don't always respond, I do look..

:-)

Re: Five boxes

#25

Re: John, the first order of business ...

John K Jordan

>>...I am not aware of purpleheart being a problem wood.

Me neither. I've used it for a number of small turnings and boxes, but I find it a little bland except for accents.

I'll tell you one of my favorite (and "safe") woods for small things - dogwood! It's is dense and fine grained, and the color can be beautiful, especially when used as the body and combined with a contrasting and complimentary wood such as bloodwood for the finials. I've had more people try to talk me out of my dogwood ornaments than any other! I'll try to remember to bring an example to show.

JKJ