more useful bowl gouge info *LINK*
john lucas
>
http://www.woodturningdesign.com/askdale/14/14.shtml
Knowledge You Can Build On — Est. 1998
more useful bowl gouge info *LINK*
john lucas
>
http://www.woodturningdesign.com/askdale/14/14.shtml
Thanks... Re: more useful bowl gouge info
GaryG in MD
>John,
This whole series is an incredible resource written by one of the Masters -- 13 issues worth of tips and comments. Thanks for bringing our attention to it. I reco that everyone check it out -- there's something in there for everybody.
...Gary
Speaking of bowl gouges...last FWW got pics wrong
Craig Daymon
>OK, I double-checked the photo before posting this. In the July/August 2008 issue of Fine Woodworking, on page 86, there is a short article in the Q&A section listing "A turner's basic tool kit". The article is fine, though I don't know if everyone will agree, but the pictures are wrong. (I'm certain this is no fault of Ernie Conover, but one of the editing staff.)
The list of turner's tools includes a 1/2 inch bowl gouge and 1/2 inch spindle gouge and the pictures are reversed. Splitting hairs, but the "bowl" gouge has such a shallow flute that it is what I consider a detail gouge rather than, as it should have been labelled, a spindle gouge.
-Craig