Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Bowl gouge grinds *LINK*

Posts

Bowl gouge grinds *LINK*

#1

Bowl gouge grinds *LINK*

john lucas

>I'm currently looking for some references to bowl gouge grinds, particularly related the names we use like, Irish grind, Ellsworth grinds etc. I did find this which is a good read.


http://www.peterchild.co.uk/info1/sflute.htm

Re: Bowl gouge grinds *LINK*

#2

Thanks John; very interesting.

GaryG in MD

>

Re: Bowl gouge grinds *LINK*

#3

pulleys

Philip Duffy

>Like many turners ( I believe ) I favor 2 different grinds with distinct applications; Ellsworth for the outside and into the bowl, and a flatter grind for the bottom section. I will also willingly admit that the bottom section often gets a nice treatment of a round nose scraper.

The versatility of the gouge is nearly endless and the skills evolve over time for each turner. I carefully watched Cindy do some marvelous work at Richmond and had to notice the extreme care she used to achieve a wonderful finish on the side of a finial. All tools for all reasons! The more the better life's choices. Phil

Re: Bowl gouge grinds *LINK*

#4

gouges

Philip Duffy

>Like many turners ( I believe ) I favor 2 different grinds with distinct applications; Ellsworth for the outside and into the bowl, and a flatter grind for the bottom section. I will also willingly admit that the bottom section often gets a nice treatment of a round nose scraper.

The versatility of the gouge is nearly endless and the skills evolve over time for each turner. I carefully watched Cindy do some marvelous work at Richmond and had to notice the extreme care she used to achieve a wonderful finish on the side of a finial. All tools for all reasons! The more the better life's choices. Phil