Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Scotchbrite colors question

Posts

Scotchbrite colors question

#1

Scotchbrite colors question

Gary Evans Tallassee, TN

>Hi all,

I have acquired some Scotchbrite through a couple of different sources and can't for the life of me remember how the coarseness runs from one color to the next. I have some gray, some green and some white.

Obviously, besides having a short memory, I'm also too dang lazy to go look this info up somewhere, so I really appreciate your input. 8^]

Gary

Re: Scotchbrite colors question

#2

Re: Scotchbrite colors question

tek-Brunswick, Ohio

>The Green is the fine. The Gray is very fine. The white has no abrasive at all. Woodcraft now carries gold and that is finer than gray. There is also a maroon, which is coarser than the gray, but I cant remember if green or maroon is the coarsest.

Tom

Re: Scotchbrite colors question

#3

Re: Scotchbrite colors question

Gary Evans Tallassee, TN

>Thanks Tom,

That's what I was thinking, but it's hard to know if the memory is faulty or not. I guess I need to look for some of the gold. I want to polish some aluminum motorcycle cases. I'm told scotchbrite and WD40 are the winning combo.

Gary

Re: Scotchbrite colors question

#4

Re: Scotchbrite colors question

BobM

>Gary,

I have some green that a friend gave me and it is much courser than the maroon.

Re: Scotchbrite colors question

#5

Re: Scotchbrite colors question

Cyril Griesbach

>tek,

I have some maroon and it is marked "very fine"...what should I believe?

Re: Scotchbrite colors question

#6

Re: Scotchbrite colors question

Vince Welch

>Maroon is about 320 grit

Grey is about 700-800 grit

Gold is 1200

White is Non abrasive

Vince

Re: Scotchbrite colors question

#7

Re: Scotchbrite colors question  *LINK*

Stuart Johnson

>


Scotch-Brite Pads --- pdf

Re: Scotchbrite colors question

#8

Re: Scotchbrite colors question

George Van

>Gary, I have found a definate difference between #M and other brands, color for color. I stay with 3M but I thin the important part is like sandpaper and run the grits from the same manufacturer.

Re: Scotchbrite colors question

#9

Re: Scotchbrite colors question

tek-Brunswick, Ohio

>I've had some Grey non-woven pads leave random deeper scratches and some that were more consistent in their scratch pattern. I'm not sure which brand did which. Does anyone know how the different brands compare? BTW I really like the gold pads Vince has.

Re: Scotchbrite colors question

#10

Re: Scotchbrite colors question

Bill Crommett

>Can anyone tell me where green fits in ?. Manufacturer unknown, but probably NOT MMM

Re: Scotchbrite colors question

#11

Re: Scotchbrite colors question

Colin Spencer

>The ones I have purchased in the UK were marked from coarsest to finest are

Green Maroon Grey White which seems to bear out what has been posted here