Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Cole Jaws

Posts

Cole Jaws

#1

Cole Jaws

Keoni

>I have two chucks, SuperNova 3 and a Woodcraft (Wood River brand) chuck. I'm looking to buy a set of Cole jaws. The Woodcraft one only goes to about 8", The Tekna tool jaws goes to 10". I don't turn larger than a 10 1/2" bowl on my Jet 1220. Whats a better choice. I made a Longsworth chuck but it does'nt hold it perfectly.

Re: Cole Jaws

#2

Steven Antonucci

Oneway jaws fit SuperNova/SN II...

steve antonucci

>Not sure about the SN3? But they are 12"...

Steven

Re: Cole Jaws

#3

Re: Cole Jaws

Keoni

>Typo error, it's s SN 2. So the One Way cole jaws fit the Tekna SN2.

Re: Cole Jaws

#4

Which version (longworth)

Ralph

>The original 4-pin design, or the newer 6 or 8 pin designs.

I don't trust the 4 pin for that very reason. But I suspect the 6 or 8 pin would hold a lot better.

Re: Cole Jaws

#5

Re: Which version (longworth)

Donna Banfield

>Whichever version that you have (or use) that you feel doesn't 'hold' that well, you might try some other methods to increase your holding ability.

This tip was passed on to me by another woodturner through this (or another frequented forum), so I don't claim ownership, but do know that it works very well: use clear plastic wrap (like Saran Wrap) or even better, the type of plastic wrap that shipping companies use to bundle many packages together. Wrap the entire piece, exposing only the area that you know you need access to turn. The 'holding' ability increases dramatically with the use of the plastic wrap.

I purchased mine a few years back at a big box office supply store. So if you're having trouble keeping the bowl on any chuck, you might try that option.

Re: Cole Jaws

#6

Re: Which version (longworth)

keoni

>I made the 6 pin longworth, the problem is,the stoppers can't secure it well, especially bowls with different angles inside. I had a couple flyers.

Re: Cole Jaws

#7

Re: Which version (longworth)

robert davis

>always use the tailstock with cole or longworth

Re: Cole Jaws

#8

I agree...

Ron McKinley

>I leave the tailstock up as long as possible with either Cole or Longworth........Ron

Re: Cole Jaws

#9

Re: Cole Jaws

Keoni

>I have'nt decided on a Cole jaw set yet. Just another question, when they state maximum diameter is that when the jaws are fully extended or is it at the closed position. I don't want a set that will not open fully or hit the bed on my Jet 1220 lathe . The Woodriver holds 8" the ,One way Mini jaws - 9 7/8" and the Nova at 10". Can any of the experts advise on this matter!!!

Re: Cole Jaws

#10

Re: Cole Jaws

Tommy Holmes

>The Nova expanded is 9.291 inches according to my chart. I don't have mine on a chuck now to measure. I don't know for sure but I would think they are all expanded measurements.