Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Priddle Pen questions...

Posts

Priddle Pen questions...

#1

Steven Antonucci

Priddle Pen questions...

steve antonucci

>If you've made a Priddle burning rig, can you tell me how the heck you keep the terminal blocks from melting? I've used up two set- the first scorched the plastic from the flames off of the wood and the second melted the plastic from the nichrome wire temperature...

Any sage advice?

Steven

Re: Priddle Pen questions...

#2

Turn your heat down.

Molly Winton

>

Re: Priddle Pen questions...

#3

Re: Turn your heat down.

john lucas

>That would be my guess also however I've had trouble with some types of terminals melting easier than others. If you can find terminal blocks that have more metal they absorb the heat slower and act like a heat sink. The way Greame uses it the tip is glowing red but you can have bright red and dull red and both will burn the wood. The dull red won't heat the terminal blocks as bad. I don't tend to use my burning tools as hot as Greame so I don't have all the same problems. Of course it takes me longer to burn a piece and I don't get the flashy flames that Greame gits.

Re: Priddle Pen questions...

#4

Steven Antonucci

Thanks folks!

steve antonucci

>I suppose that will be the answer. I'm also running a comparatively small gauge wire (22), but I just ordered some 18G. I also am thinking about a bigger heat sink and how I can attached it without shorting or burning myself. I have some ideas and if they work, I'll post...

Steven

P.S. Molly- Graeme even mentions you by name in his "demos" when he showed us your "crosshatch tip". Famouser and famouser!

Re: Priddle Pen questions...

#5

Re: Thanks folks!

john lucas

>Steve I remember trying brass tubing as a heat sink. It's been a while so I don't remember how well it worked. I crimped the brass tubing over the Nichrome wire and then inserted that into the terminal block. Wish I could tell you it worked wonderfully but I simply don't remember. I was trying to get the handles to run cooler and was more worried about that than the terminal blocks.

Re: Priddle Pen questions...

#6

Steven Antonucci

Some more data...

steve antonucci

>It also makes a ton of sense to make sure that the tip is "centered" in the terminal block. I looked at mine today, and one was and the other one was cockeyed. By bending it a miniscule (1/64") to center, it didn't burn nearly as bad.

I also reversed my thinking about "which end is up". The screws look like the top, but reality is that there is more clearance on top. I now use the pen upside down and it also has reduced burning substantially.

Working on some neat ideas for tips and surface treatments. Coming soon...

Steven