Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

OT: Need some help! Garage door springs...

Posts

OT: Need some help! Garage door springs...

#1

Steven Antonucci

OT: Need some help! Garage door springs...

steve antonucci

>Let's begin with what I know. I know that I am nowhere near strong enough to stretch a garage door spring to the hook.

My son was messing with the lock and I went to open the door. Apparently, the spring had met it's fatigue life, and it broke. As good fortune would have it, we had a spare from when we bought the house. I have tried with no luck to stretch it using a 2 ton strap as a come-along, but I wasn't within a foot.

Is there some secret to doing this? I know that the amount of energy stored in the spring is pretty dangerous, so I'd rather avoid unnecessary risk, but it's only a foot.

Guys?

Steve

Re: OT: Need some help! Garage door springs...

#2

Re: OT: Need some help! Garage door springs...

Cyril Griesbach

>Steve, I'm guessing here and depending on my poor memory. My guess is that the springs on your door are along both sides of the upper horizontal rails. If so, they are only under tension when the door is down and provide lift to open the door. They would not be under tension when the door is up as the weight of the door aids to pull them into tension. If this is correct, lift the door by hand to the open position and you should be able to install the spring with relative ease.

This was the case with my old garage door and I had to change the springs several times over the years. You may need to use a vice grip to hold the door in the up position and it's best to change both springs at this time as the other one is probably due to fail soon as well. This is also a good time to inspect the cables and pullys for ware lube the whole system.

Hope this helps.

Re: OT: Need some help! Garage door springs...

#3

Steven Antonucci

Give that man a cigar-

steve antonucci

>I actually had the same epiphany before I came back in a brief moment of clarity. When I hoisted the door up, I needed to stretch it about 1/2", which wasn't hard to do.

Thanks.

steve

Pouring sweat with an open, working garage door...