Re: Sand blasting equip. (long)
Pascal Oudet near Grenoble, Fr
>hello,
like others have said, this is intended for glass, you don't probably need to invest in it right now and I'm not even sure it will fit your need.
if you want to try sandblasting, make your own cabinet from a cheap transparent plastic box (as big as possible), the lid should lock in place so that it is more or less hermetic. 2*4" holes with long plastic gloves hermetically attached, one input hole for compressed air, one output hole to connect your vacuum (a good one, with fine dust filtration, not a dust collector. I use a festool CT22). and a few holes as additional air input, because your dust collector will pull more air than what comes out from the sandblasting gun (so no dust can escape). the abrasive will stay in the box. for the gun, a cheap one will work. ceramic nozzle will work longer. carbide are best. a good deal is the Speedblaster gun, it has its own tank for the abrasive and doesn't need much air flow.
after several hours the plastic will not be transparent anymore, upgrage by making a new hole for a plastic window (protect it with saran wrap that you can regularly replace)
that's how I started.
once you're hooked on sandblasting, you can build a bigger cabinet. I made one with plywood, 3ft*3ft*27". again, holes for gloves and so on.
then you can upgrade to a dedicated dust collector with special cyclone to separate dust from abrasive (usuefull with fine abrasive). at this point, it means you're really serious into sandblasting.
oh btw, one important point: you need a BIG compressor, with plenty of airflow. that's where you need to start. I started with a 3HP 29cfm and almost killed it after years of extensive blasting.
I now have a 5HP, 43m3/h (that should be 73cfm if my conversion is correct) compressor.
attached is a sandblasted piece (called "the nest") that I donated to the AAW auction. as you can see on the inside, the "nest" is sandblasted through.
Pascal
