Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

How Many Partially done Turnings?

Posts

How Many Partially done Turnings?

#1

How Many Partially done Turnings?

jake Niedling

>I am sure that I am not alone when it comes to having a few turnings nearly completed, but for some reason got put up on the shelf or inside the cabinet and forgotten. I am not sure why, but maybe the shape is not quite right, design, quality of the wood or you plan to texture, carve or burn in a design later. I finally got out a small plate that I started to burn some texture around the top face rim. Tonite, I finally sat down on the patio and finished the texturing. It turned out ok, but still not excited about the piece. It was mostly done to get some expirence with the wood burner. I won't mention the other partial done items from bowls to christmas ornaments. Well am I the only one????

Re: How Many Partially done Turnings?

#2

Keith Tompkins

Re: How Many Partially done Turnings?

Keith Tompkins

>Jake, You are not alone! I have unfinished work everywhere. Most of the pieces are turned as practice pieces to help visualize how the finished piece will appear. I turn goblets as warm-up practice , they are everywhere as well, when they start to build up, my wife tosses them.

Re: How Many Partially done Turnings?

#3

Re: How Many Partially done Turnings?

john lucas

>What's the difference between those and the ones you bring to the meetings. :) Ooh I'm asking for it now. My worst thing is wood that I set aside for a certain project and then never seem to get to it. I have glue ups for inside out turnings, a couple of segmented turnings started,

I almost never get back to rough turned bowls. If it gets rough turned it's like being banned into space. They just sit there. I get more excited about the next piece and then turn that one forgetting about the rough turned pieces.

Re: How Many Partially done Turnings?

#4

Re: How Many Partially done Turnings?

Texian

>Have a few too. Some just drying, one waiting for a new tool that came a few months ago, another waiting for inspiration on how to "fix" it, one waiting on insite as to what it was/is supposed to BE, and some kindling. Sometimes a piece that has been sitting around for a year or more will "grab" you, and get turned into something beautiful. Sometimes kindling.

Re: How Many Partially done Turnings?

#5

whew! I feel better

Ruth Niles

>You all just described what's in my shop in detail. I figure if I finished every piece and sold it, I'd actually have a nice nest egg instead of all those spiders having nests.

John, I have that same problem with rough-turned bowls, they look impressive all piled on a shelf but it's more the bowl grave yard then future finished work!

Re: How Many Partially done Turnings?

#6

Steven Antonucci

Almost as many as completed

steve antonucci

>I guess I have about 2 dozen sitting in the shop right now. Same as you. Not sure most of them will ever get out of that state. They do serve as technique exploration pieces.

If I ever find a technique that hides a bad form, I'll be sure to share it here as a public service...

Steven

Re: How Many Partially done Turnings?

#7

And it begs the question: Why?

Mike Jones, Redding, CA

>Offer your opinion on why this is so for so many of us. Is the propensity to not finish an affliction? Or, is it just part of the deal? Is the 'unknown in the rough' more tantalizing than the partially completed "known"? Are you a better starter than finisher?

Do you think that there is "bad karma" for not finishing what we start?

Re: How Many Partially done Turnings?

#8

Steven Antonucci

For me, it's about unmet expectations

steve antonucci

>I have gotten to a point where I'm pretty finicky about what I'll actually put my name on. Anything I won't sign isn't finished.

As far as why, in some cases, I've missed the form. In other cases, I've got a bottom heavy form. Some pieces will just take too much work to finish. I think of them as practice pieces or more appropriately "lathe scrimmages". Go through all of the motions to be ready for the game, but no one gets hurt :-)

If you want to make an omelet, you're going to break some eggs first...

Steven

Re: How Many Partially done Turnings?

#9

Re: How Many Partially done Turnings?

BobM

>I have a bunch of pieces that I started and lost interest in for one reason another, learning form being the main reason. I finished a fluted bowl the other day that I had started 3 years ago. I got inspired after the AAW Symposium. And then there are the ones that have been sitting the bag drying for a year or more!

Re: How Many Partially done Turnings?

#10

Re: How Many Partially done Turnings?

keith zimmerman, Normal IL

>I have several in various stages sitting around.

Some will never be done because there is something I wound up disliking. I write notes on them and they are kept as a reminder of what I didn't like. The next will be an improvement.

Some are in a design limbo because I can't figure out what and why I don't like something about it or how to resolve the dilemma. Until I do figure it out, it sits.

Some are sitting in my drying cabinet, waiting for the day they get finished. I don't have a rack of roughed bowls, but that's probably because I don't have the space.

keithz

Re: How Many Partially done Turnings?

#11

Re: How Many Partially done Turnings?

Marvin Ewing

>here are my 44 incompletes i need to finish


img

Re: How Many Partially done Turnings?

#12

Steven Antonucci

I re-turn roughouts when I don't feel like turning

steve antonucci

>Sounds silly, but I will grab a roughout to just be cutting. If I'm not feeling terribly creative, at least I have somewhere to put a salad.

I have a lot of bowls laying around, but only a few roughouts...

S

Re: How Many Partially done Turnings?

#13

Re: How Many Partially done Turnings?

Douglas

>I finish most of what I do and the ones I don't it is just because I didn't like it. One exception is a piece I started 7 years ago. It is or was a large pine burl about 20 inches in Diameter. It was so fragile that pieces kept flying off of it so I just quit on it. I kept what was left and just yesterday I mounted it back on the lathe and now have finish it. It is now 14 1/2 diameter by 5 inches deep.

It is full of pine rosin and I found the only way I can sand it is by soaking the sandpaper in paint thinner. The only problem is that the dust sticks to the turning as if the dusk was soak in glue so think I will have to wash it good in paint thinner to get rid of the dusk.

Now what kind of finish can I put on it that will not change the color of the wood and will not be affected by the pine rosin or pine pitch?

Re: How Many Partially done Turnings?

#14

Sounds like I am not alone, Thanks!!

jake Niedling

>