Re: Duo Lathe made in Chicago
Texadian
>The Brand name is Duro, yes it was made in Chicago about 1950. I've been using one for many years. The inverted vee ridge on the bed and corresponding notch in the head and tailstock insure that the centers will align perfectly. It has #2 Morse Tapers both head and tail.
No tools required to adjust tool rest or tailstock, has a nicely weighted handwheel on the tailstock.
The only problem with this lathe is 7 X 1 1/8" spindle threads, RH for inboard end, LH for outboard end. Nobody makes attachments with these threads. Fortunately, when I bought mine, it had two inboard and one outboard faceplate. To accomodate attachments with 8 X 1" threads, I bought a #2 Morsetaper stud and had threads machined on it. The stub is bored and tapped at the small end so I can use a piece of threaded rod and nut to hold it in the spindle.
I think it is a good lathe and will serve you well till you need variable speed, reversing, digital speed readout etc.