Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

First time at the lathe

Posts

First time at the lathe

#1

First time at the lathe

Sean Troy

>My youngest daughter who is 7 years old has been asking me to teach her how to turn. We started today with turning spindles. After we finished for the day, she asked if we could do it again this week. I think thats a good sign. Now if I can find here a face shield in her size, we'll be all set. My 10 year old daughter already turns pens.


img

Re: First time at the lathe

#2

Children's Shields

Barbara Gill, Remlik VA

>Sean, if you mark where the face shield hits her chest, you can cut off the extra with the bandsaw. I used painters tape to stabilize the cut line. This was suggested to me when I asked about childrens face shields at the Packard booth many years ago at the Southern States Symposium. The adjustable band that goes around the head will get small enough...at least with the shield Packard sold at the time.

Re: First time at the lathe

#3

Re: First time at the lathe

Steve in NC

>Great that she is interested. Likely she wants to be part of the fun and spend time with dad.I started my daughter at 9. In addition to doing what Barbara suggested with the face mask, a made a platform about sin inches high for her to stand on. Built it out of scrap MDF. It helped quite a bit and I think it was safer as well.

Enjoy

Steve

Re: First time at the lathe

#4

Rob Wallace

Re: First time at the lathe

Rob Wallace

>Sean:

Congrats on getting another progeny on the lathe! My 16 year-old daughter has no interest in woodturning what-so-ever, but a few years ago my 8 year old son was frequently on the Jet Mini-lathe turning spindles while I was on the "big" lathe (Jet 1642) doing bowls, shortly after teaching him some basic skills. I first had him use a 3/4" spindle roughing gouge to round 1.5" square billets of scrap 2x4, and then allowed him to shape the round using a Sorby Spindlemaster - both tools are fairly safe and allow some independence at the lathe without too much fear of catches and other problems. My son (now age 11) can turn small bowls with supervision, and actually won a blue ribbon at the Iowa State Fair in the kid's division with a 6" bowl he turned. He now also participates in our club's annual woodturning demonstration at a local shopping mall. In my opinion, it's important that they stand at the lathe at the correct height (build a platform), and that they gain confidence and independence as early as possible.

There are now times when we are watching TV, and all of a sudden my son will ask, "Dad, do you think we can do some turning?"..... Guess what happens next?

ENJOY!

Rob Wallace

Re: First time at the lathe

#5

Re: First time at the lathe

George Van

>That�s a great photo Sean! I enjoy the times when the grandkids are here and they ask to go to the shop also. It looks lie you need a raised platform in the near future, then when they both take over your lathes you can be the �Wood Gopher� ;-))

Re: First time at the lathe

#6

Re: First time at the lathe

Sean Troy

>Great idea on the face shield.Thanks Barbara. I'll get her a new one and start the fitting process. Now that she has interest in turning, a platform is a must. I'll start that next week after I get back from the fishing trip. Thanks all. Sean