Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

food safe finishes

Posts

food safe finishes

#1

food safe finishes

Woody in VT

>Hey everyone. What are people using for food safe finishes? I have tried two - pure tung oil and a mineral oil/beesewax finish. the ung oil looks good, but takes awhile to dry and outgas. It smells for awhile and I am worried about it leaving a taste. I like the mineral oil/beswax finish for ease of use, but it does not provide the protection and finish the tung oil does. I have been applying the oil straight, but I am going to try thinning it down and see what that does. Any thoughts? As always, thanks in advance.

Re: food safe finishes

#2

Re: food safe finishes

Greg Haugen

>Oh Woody. I think you just opened a "can of worms" or "poured fuel on a fire". There's not one subject that is more explosives as this one. Are you a AAW member? If not, find someone who is and find the spring 2008, I think, issue of the "journal" and read Flexner's article on Food Safe Finishes. The short side of it is most any finish is food safe "ONCE CURE". Watco Danish Oil, Waterlox, Lacquer, shellac, etc. all are and "state" on the label "non toxic once cure." This is where the "finish" itself varies. Finishes have different curing times. There is something to be said though for "maintenance." I don't care what finish it is, a single application will not withstand a lifetime of use. The mineral/walnut oil finishes do add some protection but are also easy to "maintain" by recoating and "combustible" rags aren't an issue where as they are with "fast drying oil" finishes. On the other hand tung oil, and other finishes provide a better protection initially it most customer's don't have the know how to "recoat" a bowl with Salad Bowl Finish or something else without wrecking the bowl or burning down the house with oily rags. I'm not saying one or the other is better, it's preference.

Here's a few tips. When you finish a bowl and it's dry. If you want to know if it's cured put it in a cupboard or box for a day. Open the door, or box lid, and smell. If you smell anything it's not cured yet.

As a woodturner, I'd use about anything and feel comfortably safe, I'm educated on the finishes and what's safe or not. The "common" customer is not. There are alot of "myths" that have to be overcomed. I have heard someone freak out about a tung oiled bowl being it was "varnished-that's poison". And then I've heard another freak out about "Mineral Oil-I'm not going to use a bowl that you're using something as it's finish that my Mom used to give me as a laxative." Also some like a "flat" finish and some like a "sheen" finish. People are VERY picking when it comes to anything that touches their food.

If the bowl will be sold, find out what the customer wants, and then use it. If it's not being sold, and it's for yourself use what you want-just make sure the smell is gone before use and enjoy your turning.

There's also something to be said about no finish at all and just a good patina.

Hope that Helps.

Greg H.

Re: food safe finishes

#3

Re: food safe finishes

Jeff Rich

>I agree!

I have found for most of the goblet and bowl finishes .....

either a coat of beeswax or nothing at all is what works best.

A mug was made for a co-worker and I used salad bowl finish for the inside, it took nearly 3 months for the smell to go away and 3 more for the slight taste to diminish.

I think he has drank enough wine to wear out the finish and he lightly sanded to remove any of the rest. Now his walnut mug has a nice patina and doesnt flavor the wine.

Re: food safe finishes

#4

Re: food safe finishes

Barbara Gill, Remlik VA

>As a wine drinker I can't imagine drinking wine from a wood goblet. In fact I would think beer would be even worse. A certain amount will soak into the wood and affect the flavor of the next. There is no way to make wood moisture proof on a long term basis.

Wood finishes is a good topic for a search. Don't overlook Russ Fairfields information on finishes.

Re: food safe finishes

#5

Mahoney's Walnut Oil

Rick Davenport

>

Re: food safe finishes

#6

Re: food safe finishes

robo hippy

>I never liked the solvent based finished, even though when cured, they pose no health issues. It takes a week to a month for them to fully cure. I have been using the Mahoney walnut oil for a couple of years, and it works fine. It is made from the husks, and leaves of the tree, not the oil from the nut meat, so allergy issues are minimal. It also takes some warm days to cure. Mike commented once that he doesn't use anything on his wood ware that he uses at home. I have one bowl that I have been using at craft shows since 99, and have never retreated it. Just rinse it out, and scour with a plastic scrubber once in a while. I have soaped it a few times. You can also use table salt, and a lemon wedge, it does the same thing. Any vegetable oil will work, but the bowl needs to be out in the open air, and remove any excess.

robo hippy