Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Energizer Bunny or Thompson's Gouge

Posts

Energizer Bunny or Thompson's Gouge

#1

Energizer Bunny or Thompson's Gouge

Greg Haugen

>Recently I utilizied an old Variable Speed grinder I had and made a double wheeled MDF power honer. One wheel flat for my beloved skews and the other with 3/8", 1/2" spindle gouge and a 1/2" bowl gouge flute profiles. An old grinder motor and a few bucks in MDF and glue is a lot cheaper than the Tormek. Here's the issue with doing this with a grinder motor, before someone goes and tries it. The grinder has to be used backwards. The wheels should be rotating up and away from you. Not down and towards you like our usually grinders. That's how power honing is done. After polishing my skew and a few other tools with white diamond rouge, I polished the flute of my Thompson's gouge. Holy Crap! When you get those things that sharp, they just go and go and go and GO!! The Energizer Bunny doesn't have anything on a honed Thompson's gouge. WOW!

Great Tools Doug! I'm singing your praise everytime it's in my hand.

Greg Haugen

Re: Energizer Bunny or Thompson's Gouge

#2

Re: Energizer Bunny or Thompson's Gouge

don lewonczyk

>I see woodcraft started carrying the koch sharping system, its not cheap at $589.99 but talk about honing your tools. Nothing like it out there and there are alot of fine sharpening systems on the market but sharpen your tools on them systems and then put your tools to these wheels with the paste is incredible. Yeah I have the system for the last 2 years or so and the guy who was the only distrubutor at the time didn't know if it was suited for turning tools but it works great for honing and polishing and mild grinding, still need your other system in case you damage the tip are have to regrind a profile. The wheels along with the paste and your motor set up is the cheaper way to go or the system you made yourself if you like a polished grind. Good luck DonL

Re: Energizer Bunny or Thompson's Gouge

#3

Aage Rendalen

Sharpening Thompson's Gouge

Aage Rendalen

>I bought a Thompson 5/8 V-gouge at the Symposium but sharpening proved a problem. I normally use a Crown gouge and sharpen it in my Varigrind jig. I had no problem using the setting suggested by Doug on the sheet he gave me, but the edge does not feel really sharp.

Re: Energizer Bunny or Thompson's Gouge

#4

Re: Sharpening Thompson's Gouge

Doug Thompson near Cleveland

>Aage, How did it cut before you sharpened it and how does it cut now?

Re: Energizer Bunny or Thompson's Gouge

#5

Re: Energizer Bunny or Thompson's Gouge

Doug Thompson near Cleveland

>Greg, polish the flute or bevel will change the cutting edge, I've done the bevel before... it was amazing.

Re: Energizer Bunny or Thompson's Gouge

#6

Re: Sharpening Thompson's Gouge

john lucas

>You didn't say what stones you were using. I generally use 100 grit and it sharpens just fine. If I really want a keen edge I touch it up lightly with a diamond hone.

Re: Energizer Bunny or Thompson's Gouge

#7

Re: Energizer Bunny or Thompson's Gouge

Greg Haugen

>This time, I polished the flute with a mdf wheel, that I turned the profile into, along with the white diamond rouge. It is amazing. It's really nice to have the "polishing" option for "problematic" woods. That polished keen edge can really make a difference. Although I do agree with both "theories" of sharpening as far as "hone or not to hone". I think they both have their place.

Great tools Doug!

Greg H.

Re: Energizer Bunny or Thompson's Gouge

#8

Re: Energizer Bunny or Thompson's Gouge

john lucas

>Doug I forgot to mention that I use a round diamond fish hook sharpening tool to hone the inside of the flute. It only takes a couple of quick swipes to make a really sharp edge. I usually do this instead of honing the outside although on problem woods I will do both.

Re: Energizer Bunny or Thompson's Gouge

#9

Diamond hone

Jorge Castaneda~Downeast Maine

>I hone the flues with a diamond hone I bought from Alan Lacer, it is a tapered flat hone, with radiused edges and grit in all sides, I love it, and use it a lot and grind less, it is expensive, but after 2 years it still is going strong.

Jorge

Re: Energizer Bunny or Thompson's Gouge

#10

Aage Rendalen

Cleaned my grinding wheel

Aage Rendalen

>Doug, I wonder if the quality of the steel demands more from the grinding wheel than regualar HSS. At least, after cleaning up my wheel, the gouge felt sharp and cut well. I'm getting used to your grind. After using only the Ellsworth grind for years, I enjoy expanding my repertoir.

Re: Energizer Bunny or Thompson's Gouge

#11

Re: Cleaned my grinding wheel

Doug Thompson near Cleveland

>The Ellsworth grind and jig work on the 5/8V so the grind is close to his. A clean wheel does help and the proper angles.

TO ALL; If anyone has a problem or a question about these tools just ask here or in a email. I can't learn or help unless you tell me... I'm just a woodturner that wants to learn more. I'm not perfect or a know it all and the shipping dept. is fired once a month.

Thanks!

Re: Energizer Bunny or Thompson's Gouge

#12

Re: Energizer Bunny or Thompson's Gouge *LINK*

Don Evans

>Greg:

I've used that same method, honing, for long time now. Got started with it for carving tools. I fine the chom-oxide compound to work much better than the white diamond. Only difference is there cutting ability and the green will also hone the inside edge of turning and carving tools. Just keep angling the cutting edge till compound just barely rolls over the edge and you've got a tool at it's sharpest possible point.

White diamond will do the same thing but it just takes longer, the green will polish the bevel so you can use it as a mirror just like the white does. Only a couple of seconds to do the job.

I learned this from a world class carver, Nora Hall, her web site has lots of information on this type sharpening.

Don


Nora Hall