>I'd like to get some comments and qusetions from turners who use the Sorby System. I.E.- setup for sorby bowl and spindle gouge. Seems like the finger profiler comes extremely close to the grinding wheel,I'm using a 6" grinder. Any replies would be appreciated.
Did you change the factory setting of 120 deg. on the arm, is the protrution of the gouge for the factory grind on the bowl and spindle gouge (Sorby) 2" or do you adjust it to the angle? For the Ellsworth sig. gouge I had to re-adust the factory setting and adjust the protrution from the profiler according to the angle. It does not follow the instruction set up sheet. And it does come very close to the grinding wheel, what size wheel are you using,6" or 8"? Whats your experience?