Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Symposium

Posts

Symposium

#1

Symposium

Doug Thompson near Cleveland

>It was good to see everyone at the symposium, so many people in one place and hundreds that you want to see. I want to thank everyone who stopped by the booth and took a few minutes to chat... that made the weekend.

Three days after returning from the symposium I'm starting to feel normal again. This was the first time as a vendor at the national and I will say it's totally exhausting. The prep work started a couple months ago and ended when the truck was loaded, the pace was non-stop almost to point you feel burned out with so much to do.

The first day at the symposium it was everything Dave and I could do to hold the fort down until reinforcements arrived in the early afternoon (my daughter and her fiancee) then things settled down a bit.

Dave sold out of the handles brought to the show... he did very well.

I did learn a few things, no matter how busy it gets you need to take time to eat and drink fluids to feel right, I didn't figure this out until Sat afternoon. Time flies when your back there and you don't think about it until it's to late.

The OTHER thing I noticed is when I was in one corner at a display and my daughter was at the other display she would have a crowd and I would be talking to myself. I laughed every time this happened.

Thanks again, it was fun to talk to everyone.

Re: Symposium

#2

Dick Hines

Re: Symposium

Dick Hines

>It must have been your beard that scared everyone off Doug.

Re: Symposium

#3

Re: Symposium

Dick Coers

>Good observations Doug, and it's a good message to all. I only do a show once and a while, but teach quite a bit. If you are not careful and take care of water and nutrition, you can go on reserve pretty fast when your body is ramped up for "battle". Run on reserve too long, it's a bad crash that will follow. Stress of any kind will severely take it's toll. Even if it's fun stress like demo turning, or selling. Glad you had a good show.

Re: Symposium

#4

Re: Symposium

Gordon Seto

>I believe Doug deserve some sort of recognition for his generosity. A small guy like him has done more than his share in contribution to the woodturning movement.

At the silent auction, I noticed he has donated several 3-gouges sets, valuing at over $150 each. That was way more than some of the "big boy" vendors. I also recognize the generous contribution from artists/turners.

Thompson Tools was also the only sponsor in the Demonstrator Handouts Book. Regrettably it was not distributed with the registration package. A lot of us didn't even aware of such a book.

One of our Clubs, which Doug is also a member of, has 10 Jet mini lathes, each with a full set of turning tools. We added two extra Jet mini lathes recently, so we are short in two sets of tools. Doug didn't even wait for me to say what our Club needs, he just told me to pick up whatever our Club needs. He is a small guy with a big heart. He could have pocket the reward of his hard work, instead he gave back a sizable portion for the benefit of turners.

Proud to call him friend.

Thanks, Doug.

Re: Symposium

#5

That was your daughter ?

john lucas

>I thought you had hired a model to work in your booth. It's easy to understand why they went to her instead of you. I noticed that had happened a couple of times when I walked by the booth. It was funny. I guess we are all just a bunch of dirty ole men. :)

I learned a long time ago about having to eat to keep up your energy. We frequently have long photo days and I have to constantly eat and drink to keep up the pace. The same was true for doing shows, you have to take a break and eat to be able to work a show the way you do. Of course you guys were almost constantly busy. I'm glad. You deserve it.

Re: Symposium

#6

Re: I certainly know Doug to be........

Jamie Donaldson

>... a most kind and considerate human being, and am amazed at his generous spirit. He has produced a series of superior tools that occupy a special place in contemporary woodturning, and he seems to embrace the tasks that he has placed upon himself. I wish him the best every time I pick up one of his tools.

Re: Symposium

#7

Keith Tompkins

Re: I certainly know Doug to be........

Keith Tompkins

>I finally purchased my first Thompson tool.....I'll test drive it when I get home. My hat's off to Doug's booth set-up, very well done. It was good to see both Doug and Dave Peebles again.

Re: Symposium

#8

It suddenly struck me...

GaryG in MD

>(no, this is not an 'accident' post) ;-)

...when I was watching a rerun of the PBS Nova show about samurai swords, that Doug's tools are his, and our, modern day equivalent of the samurai sword. They are made with knowledge of materials, care, skill, dedication, many heating and cooling cycles, attention to detail, and, dare I say, love. [All they need now is some artwork in the anodizing (hint, hint).]

Somehow, I always feel better with a Thompson tool in my hand.

...Gary

Re: Symposium

#9

Well said, Gordon!

GaryG in MD

>

Re: Symposium

#10

Re: Symposium

Jerry McCaffrey

>Now I'm disappointed! I purchased my Thompson Tool early on Friday to avoid you selling out and to get my own ThompsonLatheTools bag to carry stuff for the rest of the show. By being an early bird I missed your daughter, schucks :) I have yet to use the tool, but it was a pleasure meeting you and it sure looks sweet. Mine was just too big to use on the Delta Midi that I used during our clib's Nick Agar workshop today. Also the 3/4"V isn't quite suited for the spindle job I got right when I returned from Richmond, but now I may have some money to buy some others from you.

Jerry

Re: Symposium

#11

My thoughts on the Symposium

Dave Peebles Lyons, Ohio!

>It was really great to put all the names with faces at the symposium.

It was my first time being in a venders booth, I am usually the guy wondering around in the tool area shooting the breeze with all my friends. But in doing this I usually miss a bunch of people. This time I was in one place and everyone at least walked by the great booth that Doug had. I think I met more people being in one place, than I would have walking around.

One thing I learned... Doug Thompson never met a club he didn't donate to. It was amazing how generous he is. I don't believe he knows how to say no... to anyone.

I also would like to say thank you to all my friends who stopped by to say hello. It was great to be in a place that everyone is into the same thing. To me... that is what the Symposium is all about. Good people, good friends, and a love for the crazy world of woodturning.

But I will admit that most thought Doug's daughter was a hired model, and I can see why. We did get a few laughs talking about it. But without her and her future husband, we could not have survived the show. They were both terrific!!

Best wishes,

Dave

Re: Symposium

#12

Giving has been the way...

Doug Thompson near Cleveland

>the AAW and clubs have survived for years. Donations have built the world that we enjoy and donations only work if someone else is willing to donate money to purchase the donation. The beautiful works of art that are donated for auction that could be sold but they are not. We donate time at club meetings and to time to teach others... how many countless hours were donated at this symposium... did anyone get paid for the time spent. IMO - We support the AAW with our yearly dues (another donation), sure we get 4 magazines but more importantly we have a place to hang our hat (some made from wood).

I'm to tired to finish this post.

Re: Symposium

#13

Re: Symposium

Doug Thompson near Cleveland

>If you can't grow hair on your head it has to grow it on your face LoL

It's a good thing she looks like her mom but has my personality.

Re: Symposium

#14

Re: Symposium

Joe in a Cleveland suburb

>Congratulations Doug.

It sounds like you had a successful trip.

Joe