Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Tool Rest Spring loaded handle stripped

Posts

Tool Rest Spring loaded handle stripped

#1

Tool Rest Spring loaded handle stripped

Ed Larson

>The spring loaded handle for the tool rest post nut is stripped. I'm sure this is not an uncommon problem. I assume the cost of a new one from PM with shipping is not worth the effort. What have other done to come up with a new locking screw/handle for the tool rest post??rwon

Re: Tool Rest Spring loaded handle stripped

#2

Re: Tool Rest Spring loaded handle stripped

GaryG in MD

>Ed, I don't know about the PM, but that happened to me with my Jet 1236, and it was the screw that stripped, not the socket. They had some spares laying around the local Woodcraft store. ...Gary

Re: Tool Rest Spring loaded handle stripped

#3

Just checked Powermatic $34.00

Ed Larson

>From powermatic $14 part $20 shipping. It is the handle that is stripped not the bolt.

Re: Tool Rest Spring loaded handle stripped

#4

Grixzzly $2.75...

jwoodwright

>Ed, if it's the push button locking adjustable handle for securing the tool post...

3/8"-16tpi 3 inch handle

http://www.grizzly.com/outlet/H7525

John K.

Re: Tool Rest Spring loaded handle stripped

#5

Re: Tool Rest Spring loaded handle stripped

robo hippy

>My first one lasted about 6 months, the second didn't last that long. I had a friend weld a T handle on the screw head, and that lasted 6 years until I sold my PM.

robo hippy

Re: Tool Rest Spring loaded handle stripped

#6

Re: Tool Rest Spring loaded handle stripped

Don Evans

>Ed:

Here is one that looks like it would last. Only $5.00 from:

www.mscdirect.com

search on part # 03576279

You can also cut it off if threads are too long, they say 3.5 inches.

Easy way to cut them is to put 3/8 nut on shaft then 2 flat washers then another nut. Adjust the nuts towards each other and use hacksaw with blade between too washers. Adj nuts so washer hold blade straight but not binding it. Grind or file end slightly rounded before taking nut off shaft so it will straighten out threads when you take it off.

They also have the one you are looking for but it is polymer material and will break also with over torquing and just plain wear.

part # 82394362

Don

Re: Tool Rest Spring loaded handle stripped

#7

Dick Hines

Re: Tool Rest Spring loaded handle stripped

Dick Hines

>Ed, mine came with 2. I took one out and set aside just incase something like happened. Hasn't jey but I have an extra. Wood Craft sells handles like that but I don't know the price. If you have one close check them out.