Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Bed extensions?

Posts

Bed extensions?

#1

JL

Bed extensions?

JL

>Seeing Peter Teubel's large Oneway 24113 (http://www.woodcentral.com/cgi-bin/turning3.pl?noframes;read=184805) and the posts about large lathes got me thinking about bed extensions.

I have a Jet 1642. Realistically, I can turn about 38-40" between centers (that's with my Sorby live Steb Centre). That's been okay for table legs and I really haven't had a call to go longer as of yet. I can get a 20" bed extension (~$220) or a 57" bed extension (~$549). The 57" would definitely necessitate some rearrangement of my shop :), not to mention costing a bit. The 20" is less expensive and wouldn't mean rearranging. I would have the capability of turning ~5' or ~60" between centers.

So, for those with bed extensions - what made you decide to get the extension? Why did you choose the length that you chose? Do you really use the extra length that often?

TIA.

Re: Bed extensions?

#2

Re: Bed extensions? *LINK*

Fred Holder

>I have a Teknatool Nova DVR 3000 lathe with one 20 inch bed extension. I seldom need the length for any thing that I turn; however, it provides space to move the tail stock out of the way when turning bowls or other items where one is hollowing from the tail stock end. I would recommend the extension if you have shop space to accomadate it.

I did recently take on a commission to turn a couple of Newel Posts out of some six inch square salvaged Fir beams. The 40 inches between centers that I have was not enough and I had to turn them in three pieces. The customer was agreeable to that and I was barely able hold two of the pieces together to turn their joins. Unfortunately, I do not have shop space to add another 20 inch extension.


More Woodturning Website

Re: Bed extensions?

#3

Re: Bed extensions?

John Kyler

>I have been facing the same issue. I'm looking at the 65" making the bed almost 9'. I have a Powermatic 4224 and word is getting out. I have been approached by two different people to turn posts. I keep telling them I need an extension.. It has come down to do it. The thing is close to $1,100 retail. I have a little better price... but I hope to get this and pick up some more work.

And no it wont be going in a basement!

So for price, I wish mine was that price.

John

Re: Bed extensions?

#4

Re: Bed extensions?

don lewonczyk

>I have a Nova DVR3000 with two bed extentions which is about 60" turning capacity and I use mine mainly for walking sticks. I don't use it that often but its there if I need it, which is the nice part. I bought an extra banjo and a 30" round tool rest so I can turn on either side of the steady rest without the fuss of repositioning every few minutes. If you have the money and the space and think you may pick up extra work with it go for it. You only go around once and prices aren't getting any cheaper. DonL

Re: Bed extensions?

#5

Re: Bed extensions?

John K Jordan

>JL,

Where did you find the 1642 bed extension? I'm interested in getting one - when I turn a shovel or hoe handle I have to make it a little shorter than I'd like.

JKJ

Re: Bed extensions?

#6

JL

Re: Osolnik *LINK*

JL

>About 1/2 the way down. They aren't the only ones. Southern Tool also carries them for about the same price.


Osolnik