stripped headstock spindle
jason andrews
>I have a teknatool TL1000 with a stripped spindle. i'd like it repaired or replaced. has anyone done this before or had it done?
any reply appreciated,
thanks
Knowledge You Can Build On — Est. 1998
stripped headstock spindle
jason andrews
>I have a teknatool TL1000 with a stripped spindle. i'd like it repaired or replaced. has anyone done this before or had it done?
any reply appreciated,
thanks
Re: stripped headstock spindle *LINK*
Fred Holder
>I would recommend that you go to Teknatool's web site and check for service on your lathe. I suspect you can get a new spindle from them and instructions for installing it. Their web site is http://www.teknatool.com.
A second option would be to remove the spindle and take it to a local machinist and have them machine away the threads entirely and then attach a new piece of metal and machine new threads to fit your accessories.
More Woodturning Website
Re: stripped headstock spindle
don lewonczyk
>Go to Teknatools web site and look for Tim Geist manufacturing or US repair for their stiff. WWW.teknaltool.com. Tim is a great guy and very helpful and may have a spindle shaft in stock or can make you one as he has a machine shop and should have all the specs on it. Good luck, DonL