Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Jet live center question

Posts

Jet live center question

#1

Jet live center question

Mark in B'ham, AL

>Hello everyone, I have a Jet Mini and I've been using the live center that came with it. I just got a jacobs chuck with a #2 MT and was trying to put it in the tailstock. This was the first time I tried to get the live center out and I found that the center is hollow and thus gives you nothing to hit the knockout bar against. I ended up winding the whole tail assembly out of the hole and was able to just barely get a purchase at an angle and knocked the live center out.

I couldn't find any info in the manual about this. Does anybody else have this trouble and how do you handle it?

Thanks, Mark

Re: Jet live center question

#2

Re: Jet live center question

Ron McKinley

>The Jet Mini has a self-ejecting tailstock so you don't have to knock it out. Just turn it counter-clockwise until it pops out.......Ron

Re: Jet live center question

#3

Well, duh... I'll try it tonight.

Mark in B'ham, AL

>

Re: Jet live center question

#4

Re: Well, duh... I'll try it tonight.

Ron McKinley

>Hey, been there, done that!

Re: Jet live center question

#5

Re: Jet live center question

Nick

>There is a space between the part of the center that spins and the sleeve that holds the center. I drive the knock-out tool into this space. I'm not sure whether your set-up is the same as mine but perhaps this will help.

Re: Jet live center question

#6

Thanks Nick, but Ron's way worked.

Mark in B'ham, AL

>