Pen Mandrel Help and Lathe Question...
Kris Lasure
>I purchased my first lathe (Jet 1014) here about 3 months ago and yes you all were right, this turning thing is a bit addicting!
So I've turned some pens, a few small items and have roughed out some bowl blanks and set them aside to dry for a bit.
Here are a couple of questions...
I have the standard "A" mandrel for turning pens and I started to turn my first round top european pen with the bushing set from Lee Valley and the mandrel is too short to fit the bushings and both pen blanks on at the same time. I ended stacking a bunch of bushings on and turning each blank one at a time. Are there longer mandrels or am I missing something here?
The 1014 has been fun to work with and I'm already looking forward to my next bigger lathe. I have had problems with tripping the overload protection while turing bowls blanks. I keep my tools very sharp and try not to take huge cuts while roughing. But it will trip 5-6 times during roughing. Any one else have this issue?
A few other observations...
Thanks to Thompson and Peebles for the great gouge setup!
I'm already collecting more "free" wood than I know what to do with
Thanks also to Russ Fairfield's web site for the vast infomation on pen turning
Micro mesh is awesome
I've purchased several turning DVD's and Raffan's box DVD is incredible. I almost had to watch it in slow motion as the guy works fast as most of you probably know.
Thank you all for the information and comments here on WC.
kl



