Anybody remember AMT?
Ron McKinley
>A friend gave me a 10 piece set of AMT turning tools. Three spindle gouges, two skews, one parting tool and four scrapers. There was no evidence they had even been used but the tips were rusty. So, I cleaned them up and started sharpening them and quickly blued the edge. That's when I realized they were high-carbon steel instead of HSS!
Obviously, this set is for spindles only as there was no bowl gouge, or maybe there was no such thing when these were made and I have no idea when these were made. The spindle gouges and the scrapers have really shallow bevel angles of about 25 degrees, plus or minus. Two of the scrapers have interesting configurations: one is for getting under the lip of a vessel and the other is probably for truing up the sides of boxes.
I was sad when AMT when belly-up as I used to order tools from them when I was doing flat work and they always sent a free tool with each order! Some, I'm still wondering what they are for. GRIN
They all have a 10" handles and aren't stamped "Made in China" as the later tools were after AMT moved production off shore. I think AMT was in Royersford?, PA. .......Ron




