Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Dyed ash box with inset lid

Posts

Dyed ash box with inset lid

#1

Dyed ash box with inset lid

Ed Moore in SW Virginia

>This box is 3 5/8"H x 2 3/16"Dia. I used black aniline dye and then Bri-wax Liming wax. As recommended, I put regular clear Bri-wax over that, and it really sharpened the finish nicely. The bottom is 1 5/8" Dia and I think it should have been 1 3/8" or even 1 1/4". In any case I should have pulled it in more.

I like the effect of the dye and Liming wax. The box has a dark blue tone, but the white wax gives a nice effect - IMHO. The box feels good in the hand.

Comments or criticisms welcome.

Ed


img

Re: Dyed ash box with inset lid

#2

Re: Dyed ash box with inset lid

Sean Troy

>Wonderful looking. It may or may not look better with a slightly smaller base but for sure looks good now.

Re: Dyed ash box with inset lid

#3

Brad Vietje

Re: Dyed ash box with inset lid

Brad Vietje

>Beautiful effect, Ed. I agree that a smaller base would look a little lighter, but you'll just have to treat us to that form next time. The liming wax and dye look terrific.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Dyed ash box with inset lid

#4

Keith Tompkins

Re: Dyed ash box with inset lid

Keith Tompkins

>HI Ed, I like this one the best so far....

Re: Dyed ash box with inset lid

#5

Keith, it's a variation on ...

Ed Moore in SW Virginia

>this form which I posted a while back. When the remarks about a box with dissimilar top and base were made a few days ago, I thought of this walnut box with the ambrosia maple lid. These differing woods work very well together. This base has the shape I should have gone for on the ash box. That box just might go back on the lathe for some remedial work.

Thanks,

Ed

PS: The zebrawood platter is in a showroom on Madison Avenue in NYC. It may appear in a catalog as an accessory.


img

Re: Dyed ash box with inset lid

#6

Thanks, Sean

Ed Moore in SW Virginia

>

Re: Dyed ash box with inset lid

#7

Thanks, Brad

Ed Moore in SW Virginia

>

Re: Dyed ash box with inset lid

#8

Mike Stafford

Re: Dyed ash box with inset lid

Mike Stafford

>This is a wonderful box. It takes the rather bland nondescript grain of a piece of ash and elevates it to another level. I like seeing things like this as it gives me ideas about how to use wood for boxes that I am hesitant to use because they are not exciting.

Really good work, Ed. I like this a lot.

Re: Dyed ash box with inset lid

#9

Re: Dyed ash box with inset lid

Danny Wells

>Ed,

I like the ash box much. I especially like the shape of the knob. It goes well with the shape of the box. I really like the dye and the liming wax treatment. I've thought about doing that on some of my turnings, but haven't tried it yet. I have a lot of ash just sitting in my shop waiting for a project....looks like I'll have to try that. Thanks for the inspiration.

Re: Dyed ash box with inset lid

#10

Re: Dyed ash box with inset lid

keith zimmerman, Normal, IL

>I really like this version. The liming over dye is a look I like a lot. I hope this one makes it to Richmond too.

keithz

Re: Dyed ash box with inset lid

#11

Re: Dyed ash box with inset lid

RonZ

>It's very nice! The box shape and alignment of grain is very good.

It reminds me of a series I did a while ago. I experimented with many color dyes and liming/patina wax. The black with white accents is the best but I got good results from purple and red, too. In the picture you can also see I left the wood plain and used a black patina wax to accent the 'salt' and contrast the 'pepper'. They have other waxes you can experiment with, too, like silver and gold.


img