Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Coffee Mug Liners?? Where??

Posts

Coffee Mug Liners?? Where??

#1

Coffee Mug Liners?? Where??

Ed Larson

>I need some sources for the coffee mug liners. My daughter is comeing out in Aug. and I need to make a mug for her.

Re: Coffee Mug Liners?? Where??

#2

Re: Coffee Mug Liners?? Where?? *LINK*

ratts

>try this:


http://www.smoothturning.com/

Re: Coffee Mug Liners?? Where??

#3

Re: Coffee Mug Liners?? Where?? *LINK*

eaglesc

>Woodcraft also has them

Price is a little higher but they also have a quantity discount on fewer units.


Woodcraft mugs

Re: Coffee Mug Liners?? Where??

#4

Woodcraft

Ralph

>I strongly suspect that Woodcraft is buying them in bulk from Smoothturning.

Smoothturning also offers bulk rates

Re: Coffee Mug Liners?? Where??

#5

My experience/conclusion

Mike Jones, Redding, CA

>I bought 3 of the stainless steel liners from smoothturnings and found the service and shipping etc. to be excellent. My end product, however, when turned thin and slender, offered little to no insulation and the coffee went cold quickly. When turned thicker, while improving insulation a bit, no longer would fit the small hand of my missus. It became a very "manly" thing, while offering less insulation than the cheap double wall plastic travel mugs.

Another consideration, any travel mug without a handle requires a driver to find the sip-hole each time a sip is taken and could easily distract that driver.

My mug gets a lot of comments, but to do another one, I think that I will buy an off-the-shelf, with-a-handle mug, and simply repace the outer wall with turned wood.

Hope this helps some....

Re: Coffee Mug Liners?? Where??

#6

Re: My experience/conclusion

DD

>Is there such a thing as an insulated liner available? That would cure the cold coffee issue?

Doug

Re: Coffee Mug Liners?? Where??

#7

Re: Woodcraft

ratts

>you might try using a foaming glue like gorella glue -- provides a bit of insulation and filles any voids.