Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Symposium

Posts

Symposium

#1

Dick Hines

Symposium

Dick Hines

>OK how many of you are comming to Richmond next weekend? I am ready, I have rotation list all picked out and am ready to hit the venders room. I have a list made of the things I need. Now All I have to do is wait for next Friday.

See you all there!!!

Re: Symposium

#2

I'll be there Thursday evening...

keith zimmerman, Normal IL

>all ready to choose my rotation schedule, enter my pieces in the Instant Gallery, attend the box making SIN, and my list is ready for the trade show. And of course, last but certainly not least, I'm ready to meet up with old friends and make new ones.

keithz

Re: Symposium

#3

Steven Antonucci

Flying to Yosemite.

steve antonucci

>Going to be surrounded by bears and mosquitoes and people who need a shower. Planning never works out that I get to do everything, all of the time...

Maybe next year...

Steven

Re: Symposium

#4

Re: Symposium

Jim Miles - Charlotte, N C

>Be there Thur afternoon, I am demonstrating segmented & staved construction on Friday- Hope to see some of you all face to face!

Re: Symposium

#5

I'll be there Thursday.

john lucas

>

Re: Symposium

#6

Re: Symposium

Bill Grumbine (Kutztown PA)

>I will be arriving Thursday sometime, footloose and fancy free. I have no real responsibilities beyond a few volunteer things I volunteered to do. I won't be bringing any wood, tools, or anything like that. I haven't even looked at the rotation list, although I will be attending the box making SIN so I can heckle Mike. I'm just going to wander around and have some fun. I might even drink a beer or two while I am down there.

Bill

Re: Symposium

#7

Ditto

Mark Mandell - Gone Round In Jersey

>

Re: Symposium

#8

Uh oh...

Molly Winton

>Is Richmond ready for a foot loose and fancy free, beer drinking Bill?!? Maybe my conflict of an Alaskan cruise is a good thing!

Have y'all! I'll miss you.

Re: Symposium

#9

Re: Symposium

Doug Thompson near Cleveland

>I'm going to bring a prototype for Bill, it's up to him if it goes into production.

I'll be there Thursday to setup with a few tools and some goodies. While everyone is unloading the big trucks I'll have everything packed in a Ford Excape... that's the booth and tools. LoL

Re: Symposium

#10

might even...

GaryG in MD

>O'Neill's Penny Lane Pub is only three blocks away. But time is going to be at a premium. ...Gary

Re: Symposium

#11

three days and two nights!

GaryG in MD

>

Re: Symposium

#12

Mike Stafford

Arriving on Thursday....

Mike Stafford

>I have my schedule all laid out and I am looking forward to putting faces with the names I have become familiar with here on WC and elsewhere. My only problem is that I don't have one of those time shifting pendants that Hermione used in Harry Potter so I can be at all the demonstrations I would like to see.

I am planning on spending time and money in the vendor's area. I am always on the lookout for wood, I don't know why as I can barely move in the shop now, new tools, and a new lathe. There is a 100% possibility that a new lathe will be following me home.

Okay, Mr. Grumbine, no heckling allowed. You don't want me to cut a switch do you!

Everyone have a safe trip!

Re: Symposium

#13

Bill Blasic

Re: Arriving on Thursday....

Bill Blasic

>I'll be leaving early Thursday morning with Bill Noce and hope to get there and checked in before the crowds are too big (Remember Louisville). Don't have a lot marked on the rotation sheet yet, just looking forward to meeting friends and having a great time.

Re: Symposium

#14

Re: Symposium

Mark Williamson

>I will be working it friday from 2 until I think it ends? All I know is two shifts back to back and then I think I am going to go back up Saturday?! Can't wait, this is my first event like this!!! Not sure what to expect but I know it is going to be really cool!

Quick question though...

I normally turn miniatures and am now wanting to start turning larger items (now that I have a bigger lathe) however, most of my tools are home-made for mini's. I have one hollowing scraper that is way hugh and would like to find a hollowing tool a bit smaller. Is it really worth waiting for the symposium to get any tools that I am needing? Can I really find that good of a deal?!

Mark

Re: Symposium

#15

Re: Symposium

Bill Grumbine (Kutztown PA)

>Doug, should I be bringing a handle then? ;-) What is the bore?

Re: Symposium

#16

Almost !

Don Orr

>I had a hotel reservation and travel route all set. Ran the numbers and it quickly became apparent that it was not feasible this year. Guess I'll have to wait til it comes to Hartford, CT in 2010.

Have a great time everybody and take lots of pics for us!

Re: Symposium

#17

Re:Doug- there can't be a prototype .....

Jamie Donaldson

>....for Bill- he's definitely an original! John Lucas and I will(hopefully?!) be packed in my new and very compact PDM. We won't be able to bring home much wood!

Re: Symposium

#18

Re:Anyone arriving on Thursday.....

Jamie Donaldson

>...is welcome to help me set up the video systems for the demo rooms. Please???

Re: Symposium

#19

Re: Plans changed. Arriving Thursday.

Al Crandall -NW of Indy-

>I'm not even registered, but I will be as soon as the registration booth opens.

Re: Symposium

#20

we can bring home all the wood I can afford

john lucas

>It will fit in either the glove compartment or my shirt pocket. :)

Re: Symposium

#21

Re:Anyone arriving on Thursday.....

ralph thomas

>jamie,

we will arrive on wed afternoon i will be availble to help as far as i know. i sent in a vol req and was told i would help set up equipment. i guess this is to help you which is fine with me maybe i can learn something.let me know where you want me to contact you

ralph

Re: Symposium

#22

Re: Symposium

keith zimmerman, Normal, IL

>We will have to find that pub sometime Bill.

keithz

Re: Symposium

#23

You going to be there Al?

keith zimmerman, Normal, IL

>Where you going to be? Will you be there with the Kobra?

keithz

Re: Symposium

#24

Re: Symposium

Doug Thompson near Cleveland

>Bill, it's the 5/8 diameter tool you talked about. I'll have a 5/8 long metal handle at the show so hopefully someone could try out a round scraper that has had some amazing results inside a bowl.

Re: Symposium

#25

Re: Alas no booth. Kobra info will be available.

Al Crandall -NW of Indy-

>Just stop me and ask about the Kobra System. I'll have the data you want and a system out in the car probably.