Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

I've lost a word...

Posts

I've lost a word...

#1

I've lost a word...

Mike Jones, Redding, CA

>Can't for the life of me remember the woodworker's term for the board that is clamped or screwed to the back of a workpiece to prevent tearout during a cutting operation. Not a waste block, but the term, I think, is similar. Help?

Re: I've lost a word...

#2

Re: I've lost a word...

Greg Haugen

>Sometimes that's called a "sacrificial block/piece."

Hope that helps,

Greg H.

Re: I've lost a word...

#3

Steven Antonucci

Backer board?

steve antonucci

>

Re: I've lost a word...

#4

Zero clearance

James McClure

>

Re: I've lost a word...

#5

scrificial block or waste block is what I say

john lucas

>

Re: I've lost a word...

#6

"previous failed attempt"?

Steven Kubien

>

Re: I've lost a word...

#7

Nope - Sacrificial Waste Block

Ron in Drums PA

>

Re: I've lost a word...

#8

Re: I've lost a word...

Texian

>Sounds like a "flatwork" thing. Maybe wrong forum? What kind of cutting?

Re: I've lost a word...

#9

Re: I've lost a word...

Mike Jones, Redding, CA

>I posted the question on the "other side" too. However, I think of it as being used particularly with glue-up turnings, and thought some "segment guys" here might use the term.

Re: I've lost a word...

#10

The Technical Term Is

Mark Mandell - Gone Round In Jersey

>the "A-S Board" because of what you say when you forget to use one and the cut edge is ragged and torn out.

|;-}}