Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Mini-Hollow Form

Posts

Mini-Hollow Form

#1

Mini-Hollow Form

Ron McKinley

>Cherry with ebonized Box Elder Collar. About 3" x 3" with 3/8" hole in collar. Critiques welcome......Ron


img

Re: Mini-Hollow Form

#2

Re: Mini-Hollow Form

charlie belden

>Put it back on the lathe and make the transtion from bottom to top smoother - or make the break very obvious and clear cut. But what I'm seeing it two pieces - which individually are nice - which were put together because on fit the other.

That's the fun and games of pieces with two or three components - integrating the parts into a coherent whole that looks like everything should be there - just the way they are. Cindy Drozda is a master at it.

charlie belden

Re: Mini-Hollow Form

#3

Steven Antonucci

Agree with Charlie...

steve antonucci

>It looks like you had a great curve going, but ran out of wood at the top. The bottom also kind of flattens out, and I would have liked to have seen the foot follow the curve from the side down to a much smoother transition.

On a positive note, you've done a great job with the finish on the cherry. Looks like just about a perfect balance between shine and thickness...

Steven

Re: Mini-Hollow Form

#4

Re: Critiques

Ron McKinley

>Thanks to both of you for your comments and I agree.....Ron