zebra & wenge
ebd
>Ordered for a guy that has a summer home in East Hampton (Long Island).
Knowledge You Can Build On — Est. 1998
zebra & wenge
ebd
>Ordered for a guy that has a summer home in East Hampton (Long Island).
Re: zebra & wenge another view
ebd
>
Re: zebra & wenge
JL
>That looks really nice. I really didn't like working with wenge the time or two I tried it. Seems like I might have to change my mind :).
Re: zebra & wenge another view
charlie belden
>I've heard that Zebra Wood is tricky to work with hand tools - prone to splintering - and brittle. Is that the case when turning?
Interesting idea - the Chevron effect in the segmented part - nice grain matching.
It appears that the opening in the top is fairly small and would allow the neck to be thin significantly. Any reason why you kept the "neck" thick? I'm always curious about design decisions turners make - why "A" rather than "B"?
charlile belden
Re: zebra & wenge
eaglesc
>Beautiful!
I love the bookmatching on the wenge.
Nice finish, wenge can be problematic
Re: zebra & wenge another view
ebd
>>>>>I've heard that Zebra Wood is tricky to work with hand tools - prone to splintering - and brittle. Is that the case when turning?
I haven't found that at all. I think it turns nicely. it does smell though - like horses and sometimes like vinegar.
>>>>It appears that the opening in the top is fairly small and would allow the neck to be thin significantly. Any reason why you kept the "neck" thick? I'm always curious about design decisions turners make - why "A" rather than "B"?
I'm not sure that I understand the question. Are you referring to the wall thickness of the neck? If so, the neck is about 1/4" thick and is proportional to the wall thickness throughout. I think paper thin is more of an ego thing and isn't a good option for pieces that will be handled a lot. I've done it on a few pieces just to prove that I could. Now I shoot for a thickness/weight that feels right when you hold it.
If you are referring to the shape of the neck, I don't know what to say. It's exactly the shape I wanted. I'm not really a fan of tiny holes in the tops of pieces. Hollow forms just aren't my thing.
Re: zebra & wenge
ebd
>It's not too bad IF you remember to keep your mouth closed while you are cutting. :)
Re: zebra & wenge
ebd
>Thanks for your comments. The finish is realtively simple, easy, & failsafe.
Oiled with Watco, dried a week, numerous coats of shelac sanded almost completely off with 0000 steel wool, another week of drying, and finally a number of coats of Minwax and power buffing.