Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Finishing a bowl with a parting tool *LINK*

Posts

Finishing a bowl with a parting tool *LINK*

#1

Steven Antonucci

Finishing a bowl with a parting tool *LINK*

steve antonucci

>About half way through the video, I swear he's using a parting tool on the outside of a large bowl. I do like his lathe, though...

You have to sit through some picnic highlights to get to the parting part...


Doug Thompson could market this bowl parting gouge

Re: Finishing a bowl with a parting tool *LINK*

#2

mine skew

john lucas

>I haven't tried that on bowls but I do use the parting tool like a mini skew to finish sizing tenons. My best friend uses the top edge of the side bevel on a parting tool, like a shear scraper. The side of the tool becomes the bevel.

Re: Finishing a bowl with a parting tool *LINK*

#3

Mike Stafford

Spear point scraper????

Mike Stafford

>I'm pretty sure that is a spear point scraper with a bevel on each side... Very similar to one I have seen Richard Raffan use.

Of course I have been wrong before...

Re: Finishing a bowl with a parting tool *LINK*

#4

Re: It doesn't matter a damn

Russ Fairfield

>A cutting tool is either a sharp edge with a bevel behind it or an edge with a burr. There is only ONE criteria for the turning tool - presentation of that edge to the wood being cut. It doesn't matter a damn what the shape of the steel behind that edge looks like.

Re: Finishing a bowl with a parting tool *LINK*

#5

Re: Finishing a bowl with a parting tool

robo hippy

>I have a Raffen shear scraper which I converted to a negative rake scraper. That looks like the same tool. I love a shear scraper for the final clean up cuts.

robo hippy

Re: Finishing a bowl with a parting tool *LINK*

#6

Re: It doesn't matter a damn

Texian

>And I thought that I was the only one who had noticed that.

Re: Finishing a bowl with a parting tool *LINK*

#7

Steven Antonucci

With persistence, I suppose I could use sandpaper?

steve antonucci

>Who needs turning tools? Since we're going to sand it anyway, why not just start with the 60 grit and shape the whole bowl that way? Might take longer, but in the end, the only thing that matters is that we go through the grits in the proper order?

I will suggest that it does matter, since this person had the audience and appeared to be viewed as an expert. While in concept the tool and steel in the right hands don't make a world of difference, showing a bunch of people how to do something and posting it on Youtube (the world's biggest ego stroke-"LOOK AT ME") certainly opens folks up to ridicule if they are doing something "stupid".

I searched for chainsaw carving the other night, and found a bunch of people who were dropping trees. Some fell on their houses. Cars. Other people. Stupid? You bet. The argument that it doesn't matter how the tree gets down really doesn't hold water.

The real acid test: Would you teach someone that technique? (and cut in the wrong direction, no less?)

I wouldn't and I certainly wouldn't videotape myself to broadcast it to the world.

Steve

Re: Finishing a bowl with a parting tool *LINK*

#8

Re: Finishing a bowl with a parting tool

John Lopez

>well... the accordion player was pretty good.

Re: Finishing a bowl with a parting tool *LINK*

#9

Ya, sere gut, John. :)

Al Neighbors

>