Off center, dyed and limed bowl
keith zimmerman, Normal IL
>I have begun experimenting with off center turning and have done just a few, but am feeling pretty good about the results. This is the third bowl I have done with an off-center chuck of my own design. I also have been doing some dying and finally had a piece I thought would take liming well.
This piece is catalpa, and is about 6" in diameter. The offset for the dish is about 5/8". I sanded to 400, dyed it with USMC black leather dye, then a thin coat of lacquer to seal it. I then coated the entire piece with liming wax and let it dry thoroughly. Finally, I removed the excess wax from the piece with 0000 steel wool.
I am very pleased with the final result and see it as a decent start in this direction.
Thanks in advance for taking a peek. Any comments are welcome.
keithz



