Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Beaded Santos rosewood box...

Posts

Beaded Santos rosewood box...

#1

Mike Stafford

Beaded Santos rosewood box...

Mike Stafford

>Here is something different for me. I have a large stick of this wood that has tons of little hairline cracks in it and I keep trying to come up with some way to salvage the wood. I absolutely adore the grain and color of Santos rosewood but since it polishes up so nicely every little crack will show up.

To counter this problem I tried beading a box with lot of beads from the top to the bottom. I sort of like it. How about you? I would be interested in hearing what folks have to say, good or bad.

I lost the fit of the lid on this one. It is not sloppy rattling around but it certainly is not snug. C'est la vie!


img

Re: Beaded Santos rosewood box...

#2

Mike Stafford

An open view...

Mike Stafford

>I thought I would show you this view. If you look closely you will see a light streak that runs through the middle of lid. This is a knot that runs from one side to the other and where I stopped hollowing the lid split it in half. I thought it was an unusual effect.


img

Re: Beaded Santos rosewood box...

#3

Steven Antonucci

Beads are tough...

steve antonucci

>Since you asked, I thought I'd offer my opinion. I've tried beaded vessels in the past, and unless you get every bead exactly the same size, it makes for a funny effect. It appears from the photo that one in the middle might be a marginal amount larger than some of the others, and the one's on the bottom might be smaller. Overall, I'm not loving this one.

I also think that the beads compete with the strong grain lines of the wood. Horizontal beads, vertical grain just seems somewhat at odds.

It's just one opinion, and I can tell that you spent a lot of time on it. I just don't think that it all works together.

Steven

Re: Beaded Santos rosewood box...

#4

I like the beading, Mike!

Eddie Pacheco: San Jose, Ca.

>I haven't turned or worked this type of wood. How is the workability of the wood?

Can't tell from the picture, but I'm sure the beading would make the small hairline cracks hard to notice.

Re: Beaded Santos rosewood box...

#5

Me too!

Ron McKinley

>

Re: Beaded Santos rosewood box...

#6

Mike Stafford

Re: I like the beading, Mike!

Mike Stafford

>Eddie, Santos rosewood turns like a good rosewood should. It is dense and cuts predictably. However it seems to respond to speed and gives a better cut at higher RPM. It is rather oily and has a tendency to clog up the sandpaper somewhat. Sharp tools will minimize sanding.

Thanks for your comments.

Re: Beaded Santos rosewood box...

#7

Re: I like the beading, Mike!-I 2nd that!

Greg Haugen

>I do like the beading, but do agree that one towards the middle catches my a little bit more. But we're also woodworkers. We stare and study every minute detail. It could also be the angle of the camera just hits that bead a little more. Holding the box or being in person you probably would never know. I do also like the "strong" grain with the beads. My eye follows down and rolls over each bead with the grain. It's very nice.

Another option could possibly be "sizing" the beads. Either smaller onthe top and get bigger as the go down or vice versa.

The form and effects are very pleasant.

Well Done!

Greg

Re: Beaded Santos rosewood box...

#8

A real beauty...I like it!!

Cyril Griesbach

>

Re: Beaded Santos rosewood box...

#9

Re: Beaded Santos rosewood box...

keith zimmerman, Normal IL

>I, too, like the beading. They are subtle enough that they don't detract from the grain in the wood, but are strong enough to be an important element to the design. This is a very nice balance. I like the line across the inside of the lid too. It shows a hint of three dimensionality and serves as a focal point.

Very nicely done Mike.

keithz

Re: Beaded Santos rosewood box...

#10

Re: Beaded Santos rosewood box...

Al Neighbors

>Outstanding work, Mike. I like the beads and the way they contrast with the grain. I don't think the bead in question is a larger size... I think the grain give you an optical illusion... just another asset to the box!! Well done... the beads are perfect.

Re: Beaded Santos rosewood box...

#11

I like those beads!! and all the rest too.

Gil Jones on Lake Seminole GA

>

Re: Beaded Santos rosewood box...

#12

Re: Beaded Santos rosewood box...

Jim Terry

>Mike, I like it very much. I like the way the beading reacts with the vertical grain pattern. As far as the larger bead, that is an illusion. There is a slight shift in the grain to the left at that point and that is what draws the eye to that bead. If the box had been rotated 10 degrees counterclockwise when you photographed it, I don�t think you would see it at all. Working with that piece of wood was worth the effort.

Jim

Re: Beaded Santos rosewood box...

#13

Mike Stafford

Re: Beaded Santos rosewood box...

Mike Stafford

>Jim, I agree with you about the illusion. If you look at the picture and notice the size of the beads in profile I think you will see that there is no appreciable difference in size. In real life they are pretty much identical in size.

All of that said I have to say that this experiment was received with mixed levels of approval. I happen to like it; my wife says "It's okay" which means "I have seen you do worse things" and opinions from others vary.

So as my Dad used to say, "You pay your money and you take your chances." Nothing ventured, nothing gained I always say.

Thank you all for your comments.