Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Question, Re: Club Programming

Posts

Question, Re: Club Programming

#1

Question, Re: Club Programming

E.T.

>Hello Woodturners; I am looking for some info re. programs for club meetings. Is it important to have some sort of demo at ALL club meetings? How do your clubs choose demo topics and how do you find, volunteer or convince members to present a topic? Do your clubs have a separate committee that selects the topics and then finds the person to prepare and present the demo? Or is some other approach used? ET

Re: Question, Re: Club Programming

#2

Bill Blasic

Re: Question, Re: Club Programming

Bill Blasic

>ET,

What is done usually is that someone is in charge of the demonstrations, around here it is the Vice President. He solicits help from the group as to who they would like to see and then it is presented to the board and decisions are made. Not all meetings have demos, one month is set aside for our picnic. You can have an auction one month a year for revenue and on occasion we have a Tricks, Tips and Other Helpful Tidbits where everyone shows what helps them with their turning. At our next meeting we have a representative of the USDA coming in to present about the Emerald Ash Borer. In the past we have also had Power Point presentations on trips to the AAW symposium or the smaller symposiums. Lots of options and not all are demos. Hope this helps.

Re: Question, Re: Club Programming

#3

Steven Antonucci

Variety is the spice of life...

steve antonucci

>at least in my opinion.

For a club to be a valuable resource to everyone, I think you need to mix it up. I belong to two clubs, and one has a good mix of "demo", show and tell, adminstrivia, and presentation without the lathe running. The other one is still working on the mix, since it is a new group.

I personally think that the more advanced the group is, the less "demo" you might want. If I know how to cut a bowl, I may not come to a meeting if we're just going to watch someone cut a bowl. If I've never cut a bowl, showing some advanced topics might be way over my head. You need balance at every meeting.

One of the things that I think every club should do is set aside a few minutes for "hands on with the experts". Having a few minutes with someone who knows how to sharpen or use a bowl gouge helps the beginners integrate much quicker and more safely. I've spent 10 minutes with a guy at Five Barns who only turns once a year, and I have gotten him to produce long ribbons of wood. Even if it's only once a quarter, having a hands on for the masses is probably the most valuable thing a club can offer.

Steven

Re: Question, Re: Club Programming

#4

Re: My home club in Lu-ah-vull KY....

Jamie Donaldson

>.. has often utilized the club Directors as a sourse for demo/demonstrator suggestions. We are having to cut back on the expense of having more than 4 demonstrators /yr. from outside the club, but the resources within the membership are a wealth of information. An arborist showed how to safely use a chainsaw, a botanist how to prepare and store bowl blanks, etc.

Re: Question, Re: Club Programming

#5

Steven Antonucci

Not trying got Hijack: How did that go?

steve antonucci

>Were people open to "turning related" agendas? I know that I would be, but I sometimes get the feeling that people aren't happy unless there's a lathe running and wood flying?

What's the overall response to attendance and feedback when you tell them there won't be any turning the next meeting?

Inquiring minds want to know.

Steven

Re: Question, Re: Club Programming

#6

Re: Question, Re: Club Programming

Wally Dickerman in Arizona

>Yes, club members want to see a demo of some sort at just about every meeting. However, our club has a once a year auction to benefit the club. Members donate anything relating to woodworking. Wood, tools or whatever. We had ours earlier this month. After the auction a short demo of some sort is done. This time I did a short presentation on tool sharpening.

During the summer months our attendance drops quite a bit. People head for cooler climes. We bring in several mini lathes and have a hands on turning session, with the more experienced members helping the those that are less experienced. Seems to work well.

Wally

Re: Question, Re: Club Programming

#7

Attendance....

Wally Dickerman in Arizona

>I don't have a lot of patience with club members who only attend meetings to be entertained. If the program doesn't sound too interesting they don't show up. Unfortunately, every club has many members who fall into that category.

A large part of my enjoyment in a club is the social part. It's good to get together to share information and ideas. There is always something new to see and discuss in the show and tell pieces. The business part of meetings can be dull, but hopefully members will be interested.

Wally

Re: Question, Re: Club Programming

#8

Our meeting tomorrow is

Ed Larson

>a review of the Utah Woodturning Symposium given by the three members who attended the symposium.

Re: Question, Re: Club Programming

#9

Steven Antonucci

The "Night Out" Philosophy...

steve antonucci

>is that it's cheaper than the movies, I suppose?

I can't understand going to the meetings for the purpose of watching someone else turn. Makes me scratch my head, because watching turning isn't the world's most interesting thing to do.

It's the one thing that has always kept me from joining in the past. If you go to a meeting and haven't said something in the 2+ hours, you probably haven't grown. I understand that not everyone is going to be an expert, but everyone can participate.

I'm always looking for way to engage folks. Let's keep the ideas flowing...

Steven

Re: Question, Re: Club Programming

#10

Re: The "Night Out" Philosophy...

John K Jordan

>>I can't understand going to the meetings for the purpose of watching someone else turn.

I dislike watching a demo where someone turns some item from start to finish. Puts me to sleep.

I like watching a demonstrator show techniques. Each can be short. A complicated method can be illustrated with several pieces turned to various stages ahead of time.

JKJ

Re: Question, Re: Club Programming

#11

Re: Attendance....

E. Tabachek

>Hello to: Bill, Steve, Jamie, Wally, John, Ed and Richard (off line). I very much apreciate all your thoughtful replies to my question about club programming. Everyones' reply helped in some way; by reinforcing some idea that I had or by giving me someting new that I can use at our club.

Thank you all. ET

Re: Question, Re: Club Programming

#12

Non--turning program

Jim Miles - Charlotte, N C

>Our club has done for several years an "Outdoors" program and picnic in May at The local Boy Scout Camp. We bring in a portable sawmill & cut logs members bring, & demo how it is done. The Camp makes sure there are several interesting trees available and everyone that wants goes home with plenty of wood. A blacksmith teaches tool making, Also, chainsaw use and members can cut their own bowl blanks,

Tree identification, Lumberjack demo, make Poplar bark baskets ((mostly a spouse program) The focus is doing things you can't do " inside" Program has gone over quite well- all of us use trees & wood, things related to that seem to be of interest. Club members do woodturning demos at the Scout Camp for scouts each week during summer.

Re: Question, Re: Club Programming

#13

Re: Our meeting tomorrow is

Jim Miles - Charlotte, N C

>I think you have to remember that people join and attend or don't attend club meeting for numerous personal reasons. Some are new and are looking for help in getting started. Turning is a solitary affair for the most part and for some the social aspect of the club is important. More experienced turners may be looking for new techniques. I have been in my club 7 - 8 years and seen a lot of new members join, attend a year or so and are gone. We do a very poor job of dealing with new turners. Clubs tend to be run by experienced turners and maybe they program to their interests.