Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Nova 1624 "review"

Posts

Nova 1624 "review"

#1

Steven Antonucci

Nova 1624 "review"

steve antonucci

>Has any one here actually upgraded from a Nova 3K to a Nova 1624? I was in a Woodcraft yesterday, and I believe that the new 1624 is a substantial upgrade from my inspection.

The first thing that struck me was the casting for the headstock. I don't know the exact measurement, but qualitatively, it looked and felt substantially thicker. In general, I think that can be said about the entire lathe. The ways and tailstock were also thicker. All of this extra mass will mean stiffness.

The tailstock side od the ways also included a double bolt hold for the legs. My 3K has a single set of holes, and I always thought that was dumb. I think the extra set of holes will help in stiffening up the ways, and it seems like they got it right now.

Finally, the entire motor assembly seems much larger. My Nova had a 1 HP motor, and I upgraded it to a 1.5 HP a few years back. They start at 1.5 HP these days.

I have to say that I was impressed, and I have always been a fan. Without having spent any time with my hands on the lathe, the pictures always gave the impression it was just a repacked 3K. I think that is completely wrong, and anyone looking for a great lathe for $1000 should go get a 1624.

Free advice, worth what you paid for it...

Steven

Re: Nova 1624 "review"

#2

Jesper, Denmark

Re: We have come a long way........

Jesper, Denmark

>10 years ago, the equipment discussions were USA vs Foreign made. At that time, Delta and others were moving production to Taiwan and later Mainland China and Malaysia and many US companies made a miserable job of controlling the quality of what they were having made over there.

Now this is a lathe I do not know, but the discussion and interest is in how it has been improved for the better at a competitive price.

Nothing about it being made in China for a New Zealand company.

That is progress.

Steve: None of this is directed towards you or any other person, just to make sure we do not get any misunderstandings.

Re: Nova 1624 "review"

#3

Re: Nova 1624 "review"

john lucas

>Steve I agree. I had the Nova 3K and upgraded it with 3Ph motor and controller after the original motor shaft broke. I have turned on the 1624 and just about everything I didn't like about the 3K they improved on the new one. The bed is slightly wider than the 3K which was always a problem for me. When you loosened the tool rest to make a small adjustment it tended to rock down making it hard to make an accurate adjustment. The new wider bed lets the tool rest sit solidly.

I think we have seen huge improvements in the quality of lathes that we have available. In the lower priced lathes there is still room for improvement. Many of the lathes in the $400 to $600 range are not that great. The mini lathes although shorter are a better buy from a quality standpoint and less expensive as well.