Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Going To Richmond??

Posts

Going To Richmond??

#1

Going To Richmond??

Mark Mandell - Gone Round In Jersey

>I am, and will be driving down from Western New Jersey. I will be leaving NJ (Easton, PA area) at about 10am on the 19th to get to Richmond by about 4-5pm (IG registration, etc.) and will be staying at the Omni. I'll be returning on Sunday leaving at about 1-2pm after the IG closes. I'll have room for 3 seatcovers and a moderate amount of gear (Toyota 4-Runner). If anyone from my area or along the route (modest diversions accepted) wants to chip in for gas, post here and we'll arrange things.

Re: Going To Richmond??

#2

I'll be there!

James McClure

>

Re: Going To Richmond??

#3

Re: I'm afraid not. It just wasn't in the cards.

Al Crandall -NW of Indy-

>

Re: Going To Richmond??

#4

Re: Huh?!!!

Mark Mandell - Gone Round In Jersey

>Her I was planning on a detailed examination of the Kobra along with the bottoms of the better beer steins in Richmond. No Cards? Get a better dealer!!

Re: Going To Richmond??

#5

Met too

Mike Cunningham

>Four of us riding together from south Jersey, Thursday through Monday.

Mike

Re: Going To Richmond??

#6

Fly or drive

Tommy Holmes

>This will be my first symposium and don't know whether I should fly or drive. It's about 13 hours from Panama City, Fl to Richmond. But will I need a car to bring home all the wood and tools bought on impulse?

Re: Going To Richmond??

#7

Re: Fly or drive

Mike Cunningham

>My vote is YES! It's difficult to attend even the regional mini symposiums without buying and then buying more.

Mike

Re: Going To Richmond??

#8

Dick Hines

Re: Fly or drive

Dick Hines

>This will be my first big symposium. I only live 30 miles from the it. I will be driving my truck at least one so I can get all the wood home. After that I may ride my motorcycle if I can find some place to park it where it will still be where I left it when I come back. I guess I can get into the parking deck.

Re: Going To Richmond??

#9

Re: Going To Richmond??

jim miles- Charlotte

>I'm demonstrating segmented & staved construction, so I will be there.

Re: Going To Richmond??

#10

Keith Tompkins

Re: Going To Richmond??

Keith Tompkins

>HI Mark!! I'll be there as well, demonstating my bowl gauge in the Packard booth. I'm driving as well. I hope your piece we discussed will be finished....I'm looking forward to spending some time with you. BTW, everyone please stop by the booth to say hello!

Re: Going To Richmond??

#11

Mike Stafford

Re: Going To Richmond??

Mike Stafford

>You are on my list to see in action, Jim.

See you there.

Re: Going To Richmond??

#12

Re: Going To Richmond??

Tommy Holmes

>Keith, will you have your Gage-T there?

Re: Going To Richmond??

#13

Re: Going To Richmond??

Tommy Holmes

>Sorry about that Keith. I read bowl gouge not bowl gauge.

Re: Going To Richmond??

#14

Re: Going To Richmond??

Dave Peebles Lyons, Ohio!

>Hi Mark,

I will be there as well. I will be in Doug Thompson's booth.

Hope to see some old friends, and meet a few new ones.

Dave

Re: Going To Richmond??

#15

Re: Going To Richmond??

Doug Thompson near Cleveland

>It's going to be fun to see everyone again, with Dave in the booth we have handles to go with the tools...

Re: Going To Richmond??

#16

Re: Going To Richmond??

Mark Mandell - Gone Round In Jersey

>It's finally dry enough for me to start carving this weekend.

Re: Going To Richmond??

#17

Re: Fly or drive

Mac

>Do you have a pickup!

Re: Going To Richmond??

#18

Any skews coming with you?

Jennifer@Indy.USA

>I hope so!

:)

Re: Going To Richmond??

#19

I was but not now.

Don Orr

>Sat down and crunched some numbers and decided not this year. Hopefully next year in Hartford-much closer.

Re: Going To Richmond??

#20

Re: Going To Richmond??

keith zimmerman, Normal, IL

>I am heading that way myself, driving from Normal. Leaving Wednesday. I am looking forward to seeing everyone during the symposium.

keithz

Re: Going To Richmond??

#21

FYI Next year is in Albuquerque...

keith zimmerman, Normal, IL

>Hartford is in 2010.

keithz

Re: Going To Richmond??

#22

Re: Any skews coming with you?

Doug Thompson near Cleveland

>I'm sorry to say no skews or scrapers until the gouges are well stocked. I can't keep up with the site let alone build ahead for the symposium... hopefully there will be enough of each to get by the three days.

You have to see the new booth... all I can say is it's bright! LoL

Re: Going To Richmond??

#23

Keith Tompkins

Re: Going To Richmond??

Keith Tompkins

>HI Tommy, Yes, that's the gauge I'll be promoting for Brad Packard. See you there!