Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

flower and stem mirror

Posts

flower and stem mirror

#1

flower and stem mirror

john lucas

>I'm starting to go back to my roots on this one. My earliest mirrors had hand carved handles. to speed up the process and keep the prices low I started turning the handles. Now I'm going backwards. This one is carved and then inlayed into the wood. I made a few booboo's on this one. I cut out the hole for the inlay but then I final sanded the handle. This took off just a hair so how there is noticeable gap between the handle and the wood.

I also didn't clamp the mirror when drilling the holes for the flowers so there is a very slight gap there on one of the flowers because the wood tried to wobble when the outer rim of the drill bit grabbed the wood.

Last but not least when carving the hole for the short branch the corner chipped off. The piece of wood fell on the floor and I couldn't find it. I got another piece and thought I did my best to match the color and grain but I must have gotten a section with the darker lines because when I applied the finish it stands out like a sore thumb.

Also it's impossible to photograph chatoyance in the wood. You can move the light and bring out one look and then shift it and the curly maple changes appearance. However you can't get both in one photo. I put 2 photos in to show the differene.

OH well, attention to detail is what makes things better so I will chastise myself for these errors and move on to the next one.

The body of the mirror is curly maple, the flowers are purple heart and Tagua Nut, the handle is Tulip wood.


img

Re: flower and stem mirror

#2

Re: flower and stem mirror

Tommy Holmes

>You may be working backwards but it looks like it's the right direction. Very nice work.

Re: flower and stem mirror

#3

Re: flower and stem mirror

dan oliphant

>Based on the photos, I believe you may be just a little too hard on yourself. That is a beautiful piece of art.

Re: flower and stem mirror

#4

Re: flower and stem mirror

Dennis Taylor

>John,

Those are just wonderful mirrors, they look great despite your minior problems along the way....and the problems are only noticeable to you!!!!....if you are reverting backwards, keep up the strides.....BEAUTIFUL WORK!!!!...only have one regret about your mirrors and that is not a simple correction, you lived closer to me and couuld teach me!...ha ha Dennis

Re: flower and stem mirror

#5

Mike Stafford

Re: flower and stem mirror

Mike Stafford

>John, each mirror seems to be better than the last. You are certainly the "Mirror Man". Very nice work!

Re: flower and stem mirror

#6

Re: flower and stem mirror

john lucas

>Thanks Mike, I have fun with these. Some day I'll find a market for my high end mirrors. I make them because I like to play with new techniques.

Re: flower and stem mirror

#7

Re: flower and stem mirror

john lucas

>Dan You just have to see it closer. Of course I always ask my self what is not perfect and how can I make it better.

Re: flower and stem mirror

#8

Dennis, you'll just have to move closer :)

john lucas

>

Re: flower and stem mirror

#9

Yeah, you are too hard on yourself, John!

Eddie Pacheco: San Jose, Ca.

>I'm sure when you're holding those while sanding and finishing you can see each and every flaw, but can the average customer? If those are in the high end range most likely the buyer will be in mid to upper age range and their eyesight won't be all that good.

That mirror looks nice, put it on the display rack and sell it.