Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Ron Sardo's Gift Box

Posts

Ron Sardo's Gift Box

#1

Mike Stafford

Ron Sardo's Gift Box

Mike Stafford

>I received a note from Ron Sardo congratulating me on the birth of my grandson and he said he had a piece of wood that I needed to turn into a box to commemorate the event. I sent him my address.

A few days later I received a nice big box containing the most wonderful piece of bubinga burl that you can imagine. I have not turned it yet as I must study it for a while and make sure I have the best design to display this magnificent piece of wood. I have to wear a bib every time I look at it as I drool much like my grandson at the prospect of using it.

In addition to the wood there was a smaller box in the package. I opened it and found a most magnificent box in kingwood that Ron had turned. It is a real beauty. As I tried to open it the lid would not come off and then I discovered it was threaded. I did not know Ron was threading boxes. The grain alignment is absolutely perfect when the lid is screwed tight as the picture will evidence.

Anyway, having one of Ron's boxes in hand confirms why I so admire his work and have always looked toward his level of work as a benchmark I hope to achieve. I am so very pleased to have one of his boxes in my collection.

Thank you, Ron, for the most thoughtful gift of beautiful wood to commemorate my grandson's birth and thank you doubly for the gift of such a fine box.

The box is about 2 3/4" in both directions and it is all mine. You ain't getting it back Ron!!!

I will make a second post showing it open.

Thanks again for such a generous gift.


img

Re: Ron Sardo's Gift Box

#2

Mike Stafford

Re: Ron Sardo's Gift Box- An Open View 

Mike Stafford

>


img

Re: Ron Sardo's Gift Box

#3

Steven Antonucci

Ron is a great guy...and a pretty good turner too!

steve antonucci

>We spent a couple of days together at Totally Turning last year, and he's a helluva guy. I am honored to call him a friend, too.

Steven

Re: Ron Sardo's Gift Box

#4

Beautiful! And a ...

Ed Moore in SW Virginia

>nice thing for Ron to do.

Ed

Re: Ron Sardo's Gift Box

#5

Re: Ron Sardo's Gift Box

Randy G

>That is fantastic looking... Very nice for him to do.

Re: Ron Sardo's Gift Box

#6

Re: Ron Sardo's Gift Box

Cyril Griesbach

>Beautiful box...now we'll wait to see what you do with the wood he sent. I'm sure you will do it great justice.

Re: Ron Sardo's Gift Box

#7

Truth be told

Ron in Drums PA

>Truth be told Mike, I've always admired your work and I'm very flattered that you find my work a benchmark. Not surprisingly, there where times I looked at one of your boxes and said to myself "I should try that"

I thought it would be fun if I let you discover the box was threaded.

Re: Ron Sardo's Gift Box

#8

Re: Ron Sardo's Gift Box- An Open View

Carole Valentine

>Dang! Are you lucky or what? That box is gorgeous!

Ron, you keep raising the bar. :))

Re: Ron Sardo's Gift Box

#9

Mike Hunter

Thread start

Mike Hunter

>What is the secret to lining up the thread start so the grain structure lines up. An amazing piece of work.

Re: Ron Sardo's Gift Box

#10

Re: Ron Sardo's Gift Box

Al Neighbors

>".........Honey... come over here in the light just a minute please... do you detect a slight greenish tint to my skin...????" :))

Awesome Box... Congratulations Mike!

Ron... looks like perfection, in all the nuances... just beautiful. Grain alignment is flawless.. :)

Re: Ron Sardo's Gift Box

#11

Really great box Ron.

john lucas

>Mike I'm not sure how Ron does it but you can trim the shoulder of either the male or female side until it rotates far enough to align the grain. With a 16tpi thread a full 360 degree of revolution is only 1/16" so it doesn't take much.

Ron Is that a hand chased thread or do you use a threading machine?