Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

teak

Posts

teak

#1

teak

jimtex

>a friend of mine gave me two pieces of teak from an ancient boat he's restoring. they are about 30"x8"x1-1/2". have any of ya'll turned teak? i guess i could glue 'em together and do a bowl. just curious. thanks, jim

Re: teak

#2

Re: teak

Harry in beautiful, downtown Kulpsville

>I turned teak once. It was so full of silica (sand) it dulled the gouge in just three passes. I finally chucked a carbide round nose router bit in a Jacobs chuck and used it for most of the turning. I still have another piece of teak and it will probably sit around until my kids put me in a nursing home.

Re: teak

#3

hateful stuff

Steven Kubien

>I came upon some teak a few years ago. I made a large mallet/club with it for whacking holdfasts in my bench. Dulled my tools faster than concrete. I hated it. Last week I picked up a piece of the original batch and put it on the lathe. No different on a lathe or with handtools. I still hate it and I will never work with it again.

(Nice mallet though)

Steve

Re: teak

#4

Re: hateful stuff

john lucas

>It's tough to glue together as well. Clean it thoroughly with something like Naptha before you put the glue on.

Re: teak

#5

Re: teak: On the other hand...

Chuck Engstrom

>I've never tried to turn teak, though I've worked with it extensively on boat projects.

As far as turning it goes, the world is full of teak salad bowls from Southeast Asia, many of larger ones being segmented, so someone out there has found a way to deal with it. I have almost two dozen, large and small, mostly from yard sales and charity shops.

Its greatest advantages seem to be durability even outdoors (it almost never rots) and stability, due substantially to its high natural oil content. If you find a good way to cut it, let us know.

Best--

Chuck Engstrom

Re: teak

#6

Did this in '06

Jack Savona

>A few years ago my son-in-law gave me a leftover slab of dry teak from some custom work he was doing. It was probably 9" square by 2" high. I loved turning it and will look forward to another leftover soon.

(FYI: that was a Sorby texturing tool used.)

Jack


img

Re: teak

#7

Ric Taylor

Re: Did this in '06

Ric Taylor

>Jack,

Very nice bowl! What did you use to darken the textured areas?

Ric

Re: teak

#8

Texturing

Jack Savona

>Thank you, Rick. If my feeble mind can go back that far, I think I used a black gesso then hit it with some 0000 steel wool to clean off the high spots...I think. I might have also wiped some off with a paper towel before it dried. In any event it's the indentation that is black.

Jack