Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

"Aircraft" drill bits?

Posts

"Aircraft" drill bits?

#1

JL

"Aircraft" drill bits?

JL

>I found a nice book on turning spirals while I was at the Highland Woodworking sale a week or so back. "The Basics of Turning Spirals" by Bill Bowers.

Anyway, he uses surplus aircraft drill bits. One of the nice bits that he has is a large bit with a MT end. It is "hollow" and in the original application had oil pumped through it to cool and lubricate it while cutting metal. He uses it with an air compressor to cool the bit and help get the chips out. He has mounted an air fitting on the side.

I'd really like one or two of these bits. I think that it would work quite nicely for certain drilling applications on the lathe. Anyone have any idea where to find these bits?

TIA

Re: "Aircraft" drill bits?

#2

Re: "Aircraft" drill bits?

Curly Smith

>How about an auger bit instead?

Irwin 47414 7/8-Inch by 17-Inch Ship Auger Bit $30

IRWIN 7/8" x 17" - Tubed Long Ship Auger 47414 - Single cutter and side lip effortlessly bores holes in wood where nails may be encountered. Cuts through nails without damaging the bit. Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs. Hollow center flutes clear chips quickly out of holes. Wide lands help keep bit straight as it bores. Medium-fast screw point ideal for general woodboring applications. Bit can be resharpened. All bits have a 12" twist length and a 17" overall length.

Or, maybe a Power Drill Power Pole Auger Bits

Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips

Re: "Aircraft" drill bits?

#3

Re: "Aircraft" drill bits? *LINK*

Brian

>Go to E-bay and search for gun drill. Here is a link for a .0625 diameter. I'm sure can find others.

Brian


E-bay gun drill

Re: "Aircraft" drill bits?

#4

Re: "Aircraft" drill bits? *LINK*

Fred Holder

>If you live close to an aircraft manufacturing facility, check to see if they have a surplus store. Here in the Seattle area we have Boeing Surplus where one can purchase all sorts of drill bits and other used tools at excellent prices.


More Woodturning Website

Re: "Aircraft" drill bits?

#5

JL

Re: Found some in an Ebay store

JL

>Here is a picture from one of the stores. Coolant fed aircraft (or metal) bit.

Maybe the theory is somewhat "bunk", so to speak - I don't know. The idea is that you tap out the coolant feed hole on the side of the bit and put an air hose coupling on the bit when it is chucked up in the tail stock. You put a continuous low flow of air through the bit and this keeps the bit cooler (anyone every fried a bit on hard wood?) and helps the wood chips eject through the lands (anyone ever clogged up the lands while drilling?).

The author of the book uses them to drill out the center of hollow spiral pieces. I thought that his idea might work.


img

Re: "Aircraft" drill bits?

#6

Re: Found some in an Ebay store

john lucas

>I think the ones you need for wood only cut with one side. I had one of the bits and it only had a cutter on side. I broke it on the second use and I was being really careful. This is more like a boring cutter rather than a twist drill. A drill that cuts on both sides will follow the grain of the wood.

Re: "Aircraft" drill bits?

#7

Re: "Aircraft" drill bits?

Rich Egan

>"Aircraft" drills are a longer length than normal jobber drills in the same diameter. How they got that name, I do not know. Any quality industrial drill manufacturer should be able to supply you with aircraft drills with a straight shank, or morse taper shank if you prefer. Be prepared, they could be spendy. Check Precision Twist Drill or Chicago Latrobe for some descriptions.

Rich

Re: "Aircraft" drill bits?

#8

Re: Jump in here Crandall.... *LINK*

mike hamilton

>Al brought a gun drill to our club meeting once for show and tell. He'd altered it for air through the bit. It was substantial enough I'd have a hard time imagining breaking it - maybe 3/4 inch diameter. I believe he claimed to have drilled nonstop to the bottom of 10 and 12 inch hollow form blanks in only a handful of seconds. I can't remember how the tailstock mount was set up - but it was a typical 'Crandall engineered' piece.

Bits were much like the ones in the link.

Regards,

Mike


http://www.sterlinggundrills.com/

Re: "Aircraft" drill bits?

#9

Re: "Aircraft" drill bits? *LINK*

Bob Elliott

>J. Paul Fennell uses them. Here's a link to his site for power carving burs (aircraft drill bits are not listed there). You should be able to reach him from there and get some info.


burs for carving

Re: "Aircraft" drill bits?

#10

Re: Here is a shot of my gun drill.

Al Crandall -NW of Indy-

>http://www.cicaaw.org/node/view/2195

Like Mike said, I brought this doodad with me when I did a demo of shop built thingies at our club. It is quite aggressive if you have enough air pressure and volume to keep the flute clear. Chips will be ejecting at a rate which will make you wear every bit of protection you have. To use it, I just slid the whole tailstock by pushing on it from the end of the lathe, so I was right in the path of the debris. The wood collar has a groove inside the bore which lets air into the oil inlets of the drill. It is just pressed onto the drill shank.

Re: "Aircraft" drill bits?

#11

JL

Re: Thanks, I'll try and get one in 3/4".

JL

>

Re: "Aircraft" drill bits?

#12

Re: "Aircraft" drill bits?

Russ Fairfield

>Aircraft drills got their name because the tip and clearance angles are for drilling in aluminum, and different from the typical general purpose twist drill. Some have provisions for pumping coolant through the drill to cool the tip and flush the chips.