Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Near disaster!!!!

Posts

Near disaster!!!!

#1

Near disaster!!!!

Peter Hyde

>About 3 weeks ago I purchased some Liberon 0000 steel wool from LV. Great product! I followed instructions and cut pieces from the roll with an old pair of scissors and used it to apply wax. I had soaked some pieces in pure tung oil and spun them on the lathe to remove excess oil. The pack of Liberon was on a work bench behind and about 4 fet away from the lathe. 2 days ago I was doing a clean up in the shop and noticed a smell of something burning and after a good look around assumed it was a neighbour burning rubbish. Today I discovered this.

I read the caution on the LV site about inflammable steel wool but this was a shock and I consider myself very lucky!

I am thinking some spatter from the tung oil landed on the steel wool and caused the initial combustion as it dried because you can see dark spots on the package that look like a spatter, also there are little beads of tung oil dried on the packaging. So be warned!!!


img

Re: Near disaster!!!!

#2

Re: Near disaster!!!!

Al Neighbors

>I'm an 18 year veteran Firefighter, and I don't really understand this, unless there was so much spatter that it soaked into the wool, and thereby caused spontaneous combustion.

Is that what happened?

Re: Near disaster!!!!

#3

OMG!

Jennifer@Indy.USA

>Wow, that is scary. Thanks for the warning.

I keep my Liberon in a Zip-loc baggie. Not sure if that's good or bad? I just do that to keep sawdust and shavings off of it.

Jen

Re: Near disaster!!!!

#4

Keith Tompkins

Re: Near disaster!!!!

Keith Tompkins

>HI Peter, Yes, you're lucky! I once worked in a cabinet shop whose finish was BLO and burnt umber. One day as we worked, someone noticed smoke coming from the used rag bucket.....now, of course, nobody ever actually SEES spontaneous combustion, just the results. We all stood around the bucket and watched as it burst into flames.

Re: Near disaster!!!!

#5

Re: Near disaster!!!!

Ron McKinley

>In my last job in the Air Force I supervised a Small Arms Range, among other things, and the first day I walked in the gun cleaning room there was smoke coming from a metal can that the guys threw the used steel wool into. The wool was soaked with gun oil. From then on we used an airtight can to dispose of that stuff! ......Ron

Re: Near disaster!!!!

#6

Re: OMG!

Peter Hyde

>I am not really sure why this happened as there was only a very small amount of oil involved, but from here on ALL steel wool both used and fresh gets stored in a can. The interesting thing is the cardboard packaging was only lightly scorched and the steel wool self extinguished so I'm thinking there were some low temperatures involved. Luckily I had just cleaned the entire shop only 2 days previous and re-painted the floor. If it was in it's usual state of hell and corruption I thing there would have been a major fire. So another reason to keep a clean shop. I'm converted :-)

Re: Near disaster!!!!

#7

Peter Charles Fagg (UK)

Re: Near disaster!!!!

Peter Charles Fagg (UK)

>I have had exactly the same happen but my wirewool was dry!

I had left it behind my grinder and the sparks started it burning, I didn't realise until the smell of burning was very obvious! Couldn't figure out where it was coming from until I picked up the wirewool and got burnt quite badly.

I threw it out of the window on to a concrete path and the wind fanned it into a real blaze, the heat given off was unbelievable.

Dousing it with water only made it rust faster later on!

If we think about it, it is almost the same stuff as the old flashbulbs and they burnt very well!

Regards, Peter.

Re: Near disaster!!!!

#8

Glad you posted this, because

Keith Newton, LR, Arkansas------WebKitFormBoundary

>I was going to ask the other Peter if he had done any grinding that day.

One little spark from a grinder that won't burn your hand, will start steel wool to burning like he described.

Re: Near disaster!!!!

#9

Steven Antonucci

A "survival" kit essential

steve antonucci

>A lot of survival kits have a flint and a bit of steel wool in them. The flint is foolproof, since it works wet. The steel wool is used as tinder, since it also works wet. It burns so hot that it will ignite almost anything.

Glad that you caught it before it got out of hand. A good reminder that steel wool is one of the most dangerous things in your shop. I throw mine away as soon as I am done with it, and it's out of the shop immediately.

Thanks for posting.

Steven