Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

bandsaw purchase

Posts

bandsaw purchase

#1

bandsaw purchase

glennk

>Being new to turning I am still accumulating the necessary tools. I have an old 12" craftsman band saw with a 1/2 HP motor that is just not strong enogh to cut out the 16/4 stock I am working with. I have looked at the 14" Powermatic 1-1/2 HP and the 18" 2-1/2 HP Rikon. I should ave bought them 3 months ago they both jumped in price recently. But that is just my bad timimg. Are there any suggestions form folks with experience on either of these machines? Advice appreciated.

Re: bandsaw purchase

#2

JL

Re: bandsaw purchase

JL

>I've had the 18" Rikon for over a year. I like it a lot.

The big drawback with the 18" Rikon is that the fence is too "lightweight". The table is nice and very heavy. The guides are sturdy and strong. It'll cut through 16/4 cherry just about as fast as you can feed it. It is easy to adjust and the dust collection is good.

I've used the smaller Rikon (14") and it is also nice.

I haven't really seen the 14" Powermatic so I can't say anything about it.

Re: bandsaw purchase

#3

Re: bandsaw purchase

Greg_haugen

>Those are good options. I'd agree about the one fence being lightweight. Another option that could be worth checking into is the 14" Steel City Bandsaw. I've used the 14" and 16" models and they're excellent saws, with a lot of power, at a great price.

Just another option.

Greg

Re: bandsaw purchase

#4

Steven Antonucci

Ditto on the Rikon

steve antonucci

>I've had mine a little bit longer, and I don't really use it on flat, dry stock all that much. I mostly cut rounds for my lathe, and it is a great saw for the price. I had the Crapsman 1/2 HP bandsaw that I had modified to a 1 HP motor (made a huge difference in power, but nothing else), and there is no comparison between the two.

I was surpised at how well thought out the Rikon is, even down to the hex key holder on the backside for all of the allen wrenches it uses. It may not be the best bandsaw on the market, but it is an excellent saw.

Steven

Re: bandsaw purchase

#5

Re: bandsaw purchase

Rudy Valley

>Glenn, Rikon is a good saw, but consider HP, price, and all points of the machine and compare it to the Steel City 18", (I was considering a 16" when I kept hearing complaints from woodworker's/turner's and they're band saws and how anemic the motor was and the use of spacer block, etc. I bought a 18", 3hp saw and never had a complaint or a reason to up-grade. (UP-GRADE SYNDROME, "oh I'll never need anything that big, but as your talent grows so will your need for equiptment to handle your newfound Talent.

Re: bandsaw purchase

#6

Re: bandsaw purchase

Pete in Holland, MI

>Am pleased with my JET 14" 1.5hp machine with riser. Purchased about a year ago.