Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Ci1 easy rougher carbide tool

Posts

Ci1 easy rougher carbide tool

#1

Ci1 easy rougher carbide tool

joaz

>http://www.youtube.com/user/JacksonWoodworks

Hey group, I have been using this tool for some time now and really like it. The learning curve could not be easier. Check out the video. It seems like carbide is being used more and more in the woodturning world and I for one am happy to see it happen.

Disclamer, I have no commercial ties to this tool, only as a happy customer.

Re: Ci1 easy rougher carbide tool

#2

Re: Ci1 easy rougher carbide tool

Ron McKinley

>I've had one since Wednesday and have turned a few spindles and a bowl with it. And no sharpening!

It leaves a skew-like finish on spindles and really worked well roughing and shaping the outside of the bowl. Haven't tried the inside yet since three screws broke off while removing the faceplate and spent several hours digging them out! I need better screws.......Ron

Re: Ci1 easy rougher carbide tool

#3

Re: Ci1 easy rougher carbide tool

Bama

>The guy who invented this tool (Craig Jackson) came down to a turning gathering we had and brought a bunch of the Ci1's with him. He is a great guy who reall just wants to contribute to the woodturning world. The tools are awsome and I couldn't believe how functional they were. It's not just a roughing tool. It can literally replace half of the tools you have.

Re: Ci1 easy rougher carbide tool

#4

Re: Ci1 easy rougher carbide tool

john lucas

>Joaz Is there a site where we can see the tool. The you tube video isn't very clear and it as far as I can tell in the video it could just be a glorified scraper. Obviously it's more than that judging from what you guys are saying. I'd like to see a clear photo of some sort to tell more about the cutting edge and how it's used. How is it different from the Eliminator and Hunter tools for example which are also carbide.

Re: Ci1 easy rougher carbide tool

#5

Re: Ci1 easy rougher carbide tool

joaz

>http://www.youtube.com/watch?v=7KrWHEvx4KI

Hey John, this shows it a little better. You can also contact him here.

http://www.easywoodtools.com:80/EasyGrip.htm

Re: Ci1 easy rougher carbide tool

#6

Re: Ci1 easy rougher carbide tool

Bama

>You can go over to woodturner's resource and check out some great reviews. Go to www.turnwood.net and check out the tools thread. Craig Jackson is the guy who invented the tool. He is a active member over at WR.

Re: Ci1 easy rougher carbide tool

#7

Re: Ci1 easy rougher carbide tool

John K Jordan

>Doesn't that use standard carbide inserts made for machining metal?

JKJ

Re: Ci1 easy rougher carbide tool

#8

Craft Supplies Catalog??

Nick Stagg

>I think this tool is festured in the new products section in the C.S.catalog.

Re: Ci1 easy rougher carbide tool

#9

Re: Craft Supplies Catalog??

Nick Stagg

>Make that featured.

Re: Ci1 easy rougher carbide tool

#10

Re: Ci1 easy rougher carbide tool

john lucas

>It appears to me to be a standard metal replacement cutter. They come in a million different shapes.

Re: Ci1 easy rougher carbide tool

#11

Re: Ci1 easy rougher carbide tool

Craig Jackson

>Hey Guys,

A customer made me aware that there was some discussion of my

Ci1 Easy Rougher going on here. I hope it is O.K. for me to post this info. I thought I would answer questions, and clear up some misconceptions, so you all could get an understanding of the tool and its' concept. I have lots of info at www.easywoodtools.com

All I ask is that you guys investigate the merits of this tool before you pass judgment. If after looking it over, and reading the MANY reviews at Woodturners Resource, you still have doubt, I will send you a tool at no cost for your evaluation. If you like it, I will then expect you to pay. If you do not like it, send it back and I will pay ALL shipping

First of all, I am a master machinist and I assure you metal working inserts are WAY too dull to perform on wood. The inserts used in the Ci1 where designed from the ground up for strictly wood cutting.

As for how does this tool compare to other carbide insert tools with round cutters? It is like comparing an apple and an orange. My tool was designed for removing MASSIVE amounts of material. It does this with little to no fatigue as all the cutting forces are directed straight to the tool rest, period. I have customers with arthritis who can now turn for days instead of just hours.

Another advantage is safety. The neutral top of the cutter all but eliminates catches when you maintain a level tool handle. The square tool bar provides support directly under the cutting edge which completely stops all twisting of the tool.

Craig Jackson

270-771-0955

270-903-4269

Re: Ci1 easy rougher carbide tool

#12

Re: Ci1 easy rougher carbide tool

john lucas

>Thanks Craig. I have the utmost respect for any decent machinist and master machinists are a breed unto themselves. I'm glad you understand the differences between wood and metal. It seems like it might be a good product. As a long time woodturner I've seen a lot of crappy tools come and go so I tend to be a skeptic. As an amatuer (make that really lousy) machinist I've played with the typical carbide inserts which is why I was skeptical. thanks for putting us straight.

Re: Ci1 easy rougher carbide tool

#13

Re: Ci1 easy rougher carbide tool

Craig Jackson

>John,

I completly understand your skepticism and fully expect it due to the many times we have all been BURNT. To tell you the truth, I still don't believe how well the darn thing cuts when I'm standing there using it.

I will be demonstrating tool in at the Utah and the AAW symposiums if anyone wants to see it go.

Craig

Re: Ci1 easy rougher carbide tool

#14

Re: Ci1 easy rougher carbide tool

Gary in Zirconia,NC

>Craig,

Could you tell me the width of the cutter?

Gary

Re: Ci1 easy rougher carbide tool

#15

Re: Ci1 easy rougher carbide tool

john lucas

>Craig I'll be at Richmond. There will be a lot going on but I'll try to look you up.

Re: Ci1 easy rougher carbide tool

#16

Re: Ci1 easy rougher carbide tool

Craig Jackson

>Gary,

The inserts are about 9/16" square.

Craig

Re: Ci1 easy rougher carbide tool

#17

Re: Ci1 easy rougher carbide tool

recon

>I also have this tool & wrote a good length review on it. I have no affiliation with Craig or his company but am a VERY SATISFIED customer.

Link to my review. http://www.woodturnersresource.com/cgi-bin/yabb2/YaBB.pl?num=1206912498

Chuck