Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

A Simple Chuck Key Rack

Posts

A Simple Chuck Key Rack

#1

A Simple Chuck Key Rack

Fog Tanner

>A couple of days ago someone asked if I would post a picture of the PVC rack I use for holding my chuck keys to keep from loosing them. I have several chucks, a couple of Strongholds and several Vicmarcs of different sizes. One of the Vics is lever operated so I needed a place for the levers too.

I have a dust hood, similar to the one in Raffan's books, that sit behind my lathe. I fastened the rack onto the side of the dust hood at a hight that is comfortable for me and slightly above the headstock. The rack is made from 1" PVC pipe and a couple of "T" fittings. The 1" is just the right size for the Stronghold key. I drilled holes in the PVC pipe to fit the various keys and levers. The holes in the pipe for the levers are drilled at an angle to clear the T handle keys.

In the picture, the two smaller levers on the end are for the lever operated Vic, the next key is for the small Vic, next to that is the lever for removing the large Vic (the Vic insert has a blind hole for the lever to remove the chuck from the spindle), the large Vic key, and the key for the Stronghold. The second row contains the two different wrenchs for changing the jaw sets. One fits the small Vics and the other fits the large Vic and Strongholds.

I worked in a machine shop out of high school and in college running an engine lathe doing productin work. I got in the habit very quickly of using my left hand to pick up the chuck key and replace it on the tray built into the head stock. I still do that with my wood lathe and after building the dust hood, I added a piece of PVC to hold the Stronghold. After adding the Vicmark chucks I added the T fittings to hold all the levers and keys. It has saved digging around for keys and levers and loosing them in the shavings.


img

Re: A Simple Chuck Key Rack

#2

Closer look

Fog Tanner

>The rack is mounted using two drywall screws. The wooden spacer is a piece of scrap 2x4 with a "V" down the middle. I predrilled a couple of through holes in the PVC and spacer. I then enlarged the two outside holes to 3/8" so I could get a screwdriver in.

Biggest cost was the two T fittings which were around thirty five or fifty cents each at local ardware store when I bought them several years ago. I already had the PVC from some other projects.

A simple 15 minute project that has saved me quite a bit of time. Hopefully, it is of some use to others.

Fog


img

Re: A Simple Chuck Key Rack

#3

Re: Thanks for the Photos

ET

>Hi Fog, I asked for the photos and am so glad that you put some up. I will make myself one of these this morning and get my chuck keys organized before I turn on my lathe. Thank you very much. ET

Re: A Simple Chuck Key Rack

#4

Great design

Randy G

>Thanks for posting this as well... I have a tool rack next to my lathe that I drilled some holes for chuck keys in too, but I like this design as well.

Re: A Simple Chuck Key Rack

#5

Thanks

Fog Tanner

>You are most welcome, and thanks for the kind words. I hope you can get some use from the idea. I didn't glue mine together in case I wanted to make changes later, the press fit seems to work OK so far. A small screw will stop the pieces from coming apart in case they do want to slip out. If you come up some some variation, I would be interested in seeing a picture - always looking for a better way.

Fog