Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

What would you make with these blanks?

Posts

What would you make with these blanks?

#1

What would you make with these blanks?

GolfSteve in Calgary

>What would you make with these blanks? They are poplar and soaking wet.

I'm not much of a bowl turner but I'd like to make something nice for a charity auction that we run every October (we work in the Ukraine and Burma - it will be interesting to see if we can do anything for the Cyclone victims this year). The round blank looks like it should become a platter. The other two I have no idea. The round blank is about 10 to 12" in diameter.

I found that it was really hard to read grain direction in wet wood. There's about 10 other plain grained blanks that I am hoping will spalt to improve their appearance. Some of them smell like dog-crap :-( I have another nice crotchwood blank that is sitting in a garbage bag covered in dirt, miracle grow, and beer :-)

Any thanks to everyone who recommended that I buy a big lathe. A mini lathe would have been very limiting. I roughed out a wet blank last night and even with a big General 260 I was bogging the motor down. Vibration was pretty manageable. Now I just have to figger out how to use my bowl gouge properly. I switched to a scraper because it was a lot easier.

Thanks,

Steven


img

Re: What would you make with these blanks?

#2

Steven Antonucci

Well, they are curly for one!

steve antonucci

>Looks like your score is better than advertised. The blanks are all curly from the photo you posted.

I'd go end grain hollowform on the rectangular one. Bowl with flat side down on the other two unless you want to go hollowform on the larger.

I wouldn't try to spalt them if they are curly. Too much going on in one piece of wood.

Steven

Re: What would you make with these blanks?

#3

5,287 mini goblets :)

john lucas

>

Re: What would you make with these blanks?

#4

Re: 5,287 mini goblets :)

George Van

>What.........I thought they came from mini trees!

Re: What would you make with these blanks?

#5

Motor bogging

Bill Howatt

>I have a General26020 with electronic VS. I find it is more likely a slipping belt than the 2HP motor actually bogging down when I have a "stall". This typically happens on the slow speed where the diameter of the motor pulley is small.

Bill

Re: What would you make with these blanks?

#6

Re: 5,287 mini goblets :)

John K Jordan

>A conscientious turner always makes mini goblets from bonsai trees that came down in a windstorm.

JKJ

Re: What would you make with these blanks?

#7

Re: Well, they are curly for one!

GolfSteve in Calgary

>Unfortunately hollow forms are beyond my skill level, but I agree that is a good choice.

I'm only trying to spalt the other blanks which mostly have very plain grain.

Thanks,

Steven

Re: What would you make with these blanks?

#8

Re: Motor bogging

GolfSteve in Calgary

>Thanks Bill, I'll check that out next time.

I probably won't try to stop the belt from slipping...it might be a nice safety feature for an inexperienced turner :-)

Cheers,

Steven