Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

shear scraper spindle gouge

Posts

shear scraper spindle gouge

#1

shear scraper spindle gouge

john lucas

>Does anyone remember who had the upside down spindle gouge as a shear scraper on their website. I've seen it a few times but can't remember who it was. I would like to build one this summer to see how it works and mostly just to teach myself the blacksmith skills needed to make it. If I use it I would like to give proper credit to the person who thought this up.

Re: shear scraper spindle gouge

#2

Re: shear scraper spindle gouge

Greg Haugen

>John,

I did a quick Yahoo search and found this link.

http://www.maine-web.com/woodturning/shapeshifter/scaper.html

I've made them out of old spindle gouges or even some old Carbon steel gouges. The forged gouges (sometimes called german or continential gouges) work best. Like the ones in the cheap sets but roughing gouges also work well.

Hope this helps,

Greg H.

Re: shear scraper spindle gouge

#3

Re: shear scraper spindle gouge

Ed Wujciak

>I printed out that article and made some and they worked pretty good. Unfortunately I don't remember who posted it and the article is home and I'm at work. If you don't get the answer by the time I get home, I'll get it to you then.

Re: shear scraper spindle gouge

#4

Re: shear scraper spindle gouge

Don Orr

>I think it was guy named Joaz from Maine. He has a website but I don't remember it. Maybe Joaz Hill ??

Re: shear scraper spindle gouge

#5

Re: shear scraper spindle gouge

Ed Wujciak

>That's the one....

Re: shear scraper spindle gouge

#6

Re: shear scraper spindle gouge

joaz

>That would be me! I have had a lot of positive feedback from other turners and have introduced this tool to all my students who find it much easier and safer to use then the traditional shear scraper.

All the info in on my web site. The gouge I started out with and still use is the 1 1/2" Osolinik roughing gouge. Smaller tools are also handy for smaller projects. I usaually find old carving tools that I can be converted to shear scrapers.

I usually use this tool on the inside but with practice, it works very effective on the outside curve.

More more info,visit: www.maine-web.com/woodturning

Try it!

Re: shear scraper spindle gouge

#7

Re: shear scraper spindle gouge

Sean Troy

>Just take a shallow flute roughing gouge and sharpen it upside down and use it upside down. Works like a charm and very hard to get a catch with it.

Re: shear scraper spindle gouge

#8

you da man-thanks Joaz -I'll bookmark it

john lucas

>

Re: shear scraper spindle gouge

#9

Re: shear scraper spindle gouge

Doug Thompson near Cleveland

>Joaz, I'm glad you let everyone know about this... many good ideas get lost. It has to be the large shallow radius that makes it work so well.

Hummm... I wonder if A11 can be forged without to many problems.

Re: shear scraper spindle gouge

#10

Re: shear scraper spindle gouge

Dick Anderson

>Jim Christiansen in Moscow, Idaho introduced me to the upside down spindle gouge shear scraper in 1998. You can catch him on his web site www.kestrelcreek.com

Re: shear scraper spindle gouge

#11

Joaz Hill *LINK*

Jorge Castaneda~Downeast Maine

>Hi John,

Joaz site is here:


shapeshifter

Re: shear scraper spindle gouge

#12

oops!

Jorge Castaneda~Downeast Maine

>I posted without reading the other posts...

Re: shear scraper spindle gouge

#13

Also the German Spindle Gouge *LINK*

Craig Daymon

>Packard Woodworks sells a German Spindle (rouging) Gouge that is similar to the Olsolnik gouge. I haven't ground it like you describe, but I do find it very effective to shear scrape the inside of a bowl. When doing so, I hold it with my right thumb in the flute with 2 fingers on the handle and 2 on the flute and draw it toward me with the left hand.

Produces nice shavings.

-Craig


Packard German Spindle Gouges