Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Aligning band saw blade

Posts

Aligning band saw blade

#1

Aligning band saw blade

chris krohn

>Hi,

I have a 1954 Craftsman bandsaw that I am trying to refurbish. I am having a heck of a time lining up the blade in the center of the top and the bottom wheels. I have tried tilting the top wheel, manually pushing the blade back further and everything in between. I took it apart today in a fit of rage and gave up after three hours of messing with it. If the blade is centered on the top wheel, the blade runs towards the front of the bottom wheel, almost off the wheel, therefore if I center on the bottom, it comes off the top in the back.

Help before I throw it out the window

Re: Aligning band saw blade

#2

Re: Aligning band saw blade

Dave Peebles Lyons, Ohio!

>Hi Chris,

One thing to check is to see if the wheels are co-planer. That is, are they in alignment. You can check this by taking a long straight edge and laying it to the face of the wheels. You will have to remove the table to do this. If they are out a bit you can shim the wheels with a washer to get them close. I had to do this with a Jet bandsaw. It is working perfectly these days.

I would also reccommend you try to find a copy of the bandsaw book by Mark Duginske. Lots of good info on bandsaws.

Best wishes,

Dave

Re: Aligning band saw blade

#3

Jesper, Denmark

Just like Dave said.

Jesper, Denmark

>

Re: Aligning band saw blade

#4

Re: Aligning band saw blade

John K Jordan

>I also had to shim the upper wheel on my Delta bandsaw to align the wheels. The book Dave mentioned helped me - a excellent reference to have around anyway.

Itura Design (1-866-883-8064) sells a set of wheel shim washers to fit some lathes.

JKJ

Re: Aligning band saw blade

#5

Re: Just like Dave said.

john lucas

>Both of the things mentioned plus check to see if your tires are crowned. They should be higher in the middle. This keeps the blade tracking the way it should on the wheel.

Re: Aligning band saw blade

#6

Re: Aligning band saw blade *LINK*

tm

>Lots of great stuff here...


great tips from Russ Fairfield