Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Powermatic 3520B Lathe

Posts

Powermatic 3520B Lathe

#1

Powermatic 3520B Lathe

Wesley

>I am in the market for a lathe.

I need opinions on the Powermatic compaired to these; Laguna, Rikon,

Jet, Nova. I am aware this lathe (3520) is pricey. Is the Powermatic

worth the difference in price? Once I learn to turn, I would like to

turn medium to large bowls. Any help in this decision would be great.

Re: Powermatic 3520B Lathe

#2

Re: Powermatic 3520B Lathe

Gary in Zirconia,NC

>Powermatic 3520b is worth the extra!!! You'll never regret it.

Re: Powermatic 3520B Lathe

#3

Steven Antonucci

Define medium...

steve antonucci

>I used to get caught up in the "swing" game, and I no longer do. 16" is practical, 20" is better, but rarely used.

Don't base your decision on "size". While it's nice to have the extra room when you get a big chunk of wood spinning, it's probably a rare event that you spin wood that big. Firstly, the availability of wood worth turning in that size is limited. Secondly, everything about big is harder. Mounting. Roughing. Drying without splits. Finishing.

Concentrate on the amount of mass. The Powermatic is the biggest and heaviest of the bunch by lots. I think the Rikon is probably a pretty good lathe (they bought someone else's mfg plant, forget who it was...) and Nova's are great for the money.

If I was getting started with turning, I'd focus more on getting great with good equipment than getting great equipment without knowing how to use it. A lathe retains most of it's value, and you'll see people selling Nova's for $600 when they paid $900-1000. $400 for 5 years of use is peanuts.

If you have a burning desire to buy once and never upgrade, buy the Powermatic at 2.5X the Nova...

Steven

Proud Nova owner finally thinking about upgrading again...

Re: Powermatic 3520B Lathe

#4

Re: Powermatic 3520B Lathe

john lucas

>Wesley I have the powermatic 3520A. It is excellent. I would definitely say it is better than the Jet 1642. They are similar but the mass of the 3520 is so much greater and that really shows up in medium to large bowls.

The Laguna is too new for me to draw conclusions. The Rikon is very good and probably in the same league as the Jet 1642. In the price range of the Jet there are several lathes now including the Nova lathe.

I haven't seen any others that I thought would match the Powermatic for the price.

Re: Powermatic 3520B Lathe

#5

Re: Powermatic 3520B Lathe

John Kyler

>Ditto what John said.

I have access to the Pm3520b, PM4224, Oneway, and the Jet 1642.

The PMs are great and worth the money.

The Oneway has a noise that sounds down the tube of the lathe that I would not like.

The Jet is fine if you cant afford the PM.

John

Very Happy Owner of a PM4224

Re: Powermatic 3520B Lathe

#6

Re: Powermatic 3520B Lathe

Dave Peebles Lyons, Ohio!

>Hi John,

I don't mean to high jack the thread, but I have a Oneway and don't have that problem with mine. Perhaps it needs to be leveled a bit better.

But I agree the the Powermatic is a great lathe at the price. I have turned on many and found them to be a terrific lathe.

Best wishes,

Dave

Re: Powermatic 3520B Lathe

#7

Re: Powermatic 3520B Lathe

Bruce McElhaney, Spring Lake, Michigan

>I've turned on several lathes at various classes etc., and they all worked fine and did the job. For people starting out I'd suggest getting a Jet type Mini lathe. In fact I plan to get one myself for small stuff. Currently I have a PM 3520A and am very happy with it. However, my all time favorite lathe is probably a Stubby by a slight margin over the Oneway. But at this stage of my life it's certainly not worth switching over.