Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

New Michaelson bowl gouge

Posts

New Michaelson bowl gouge

#1

New Michaelson bowl gouge

Bill Neddow

>I am curious about how versatile the new Johnnes Michaelson bowl gouge is. From what I have heard, he not only rough turns blocks of wood into hats, but uses it to do quite a bit of the finish cutting. Can anyone enlighten me?

Re: New Michaelson bowl gouge

#2

Re: New Michaelson bowl gouge

Donna Banfield

>Bill, I have several of JoHannes' gouges. I first used one (3/8) when one of my turning clubs brought him in for a 2-day demo and workshop last fall. The first day was a demo of him turning a full-size hat, and the second day was turning your own mini-hat. During the workshop he showed us how to sharpen the gouge, which is done free-hand.

I started to use that gouge when I turned bowls, and discovered that it was very easy to make that transition near the curve at the bottom of the bowl. I was also able to shear cut the interior without the white-knuckled fear that was associated with using any side-grind bowl gouge. That's because there is no sharp cutting edge that is unsupported. I've never been able to successfully do a shear cut on the interior of a bowl using my Ellsworth gouges without getting a catch. And if you've gotten a catch in that way before, you know what I'm talking about when I say that those catches are HUGE!

Two months later I went to Manchester, Vermont and spent 3 days in his studio. During this time I turned a full-sized hat, and used more of his gouges in all the sizes. By that time, though, I was very comfortable with the gouge and the grind. After the club demo and workshop, I reground all my old Glaser gouges with Hannes' grind.

I've become a big fan of the grind now, and love the tools. Like the Glaser gouges, they have a handle that is balanced with lead shot. However, unlike the Glaser handles that are cold metal, the HannesTool gouges have a very comfortable handle and grip.

Resharpening the gouge is simple, once you've seen how it's done. Hannes is supposed to put a video out on YouTube on how to sharpen it; don't know when though. I recently shot a video on how to make a twice-turned bowl for ExpertVilage.com and only used the HannesTools gouges. In the series, I show how to sharpen the gouge, just like Hannes. The series should be out very soon, and when it is, I'll post a link.

Re: New Michaelson bowl gouge

#3

Re: New Michaelson bowl gouge

Bill Neddow

>Thanks, Donna. I should have been more specific. I was referring to the one inch bowl gouge with the 3/4 inch tine.

Re: New Michaelson bowl gouge

#4

Re: New Michelson bowl gouge *LINK*

John Peck

>Link to the Michelson tools for those interested - http://www.hannestool.com


Michelson Tools

Re: New Michaelson bowl gouge

#5

Re: New Michaelson bowl gouge

Barou

>I understand that the steel used in the gouges are supplied by Doug Thompson - so we know they're top-notch. The handles are excellent. Not familar with the grind.

Re: New Michaelson bowl gouge

#6

Re: New Michelsen bowl gouge

Johannes Michelsen

>Thanx to all for the nice things you've said about my new tools and also for the posted link. I've been in the developement process for about two yeras now and have learned a few thngs about making quality tools, some of them the hard way. As ahs been stated already the steel is provided by Doug Thompson and is A11, my view the best for the purpose; virtually everything one needs to know about the tools can be found on the web-site even if it only is a single splash page.

Bill, when you said tine I'm asuming you meant tang and yes that is the case, it goes in the 22 inch handle and works great for roughing and also sometimes as a really stiff curved shear scraper. Most of the shaping and or finishing cuts are done with the 3/8 or 1/2 inch tools.

Donna, you are right I am going to be doing a short video about the grind to put on YouTube just haven't got there yet, maybe i'll shoot it this weekend with students here in a hat class!!! Meanwhile here is what I've got that i sent to a customer in Germany who was concerned about the grind;

I feel I should try to explain my grind to you so you can appreciate the full wonderfulness of it. Most people who take my turning courses and try the grind fall in love with it.

When grinding I first roll just the nose of the tool to do only the very front of the tool, then swing to one side and pick up from where I left it when doing the front tip rotating the tool and pushing upward at the same time until the flute is almost facing the wheel. This tucks in the sides of the gouge making it almost catch/hook free, it also maintains the same angle relationship�45 degrees�between the inside of the flute and the bevel so that almost no matter how you rotate the tool as you cut you will achieve the same cutting action�DO NOT BE AFRAID TO ROTATE THE FLUTE TOWARD THE WORK PIECE---IT WILL CUT BEST WHEN YOU DO!!! There is only about 5 degrees of rotation where a catch is possible once you roll past that the tool becomes a negative rake scraper.

The reason the back of the bevel is rounded away is to minimize the amount or length of bevel that is rubbing, with a full length bevel it is hard to pick up and maintain the tiny cuts that I need to do the make uniform the thickness of the crown of a hat at 1.5mm. with my very small rubbing bevel it takes as much as 8 times as much miss motion to fall out of a cut, there by desensitizing the functionality of the tool making it much easier and safer to use.

As you observed there is no jig for this grind but I am working on producing what I call a grinding aid which I will publicize ASAP.

Hope this is clear and that you have a good experience with my tools.

I will also post the grind in the grinds section that Deb just found today:-) Hannes


img

Re: New Michaelson bowl gouge

#7

The Johannes Michelsen Grind

Doug Thompson near Cleveland

>Like Donna said the grind is wonderful to use, the wings are ground way back so you can't get a catch. IMO Johannes should also teach a bowl turning class to show how well his grind works. Here's a couple pictures of the grind 3/8, 1/2 and the 1 inch gouge that Bill is talking about.


img

Re: New Michaelson bowl gouge

#8

Re: The Johannes Michelsen Grind 

Doug Thompson near Cleveland

>


img

Re: New Michaelson bowl gouge

#9

Re: The Johannes Michelsen Grind

Steven Kubien

>This looks very similar to the grind Richard Raffan shows on his bowl gouges in his books and Johannes' description of how to replicate this grind sounds a lot like what Raffan does. I looks to me like it would do a great job of doing the inside walls of bowls and open vases.

I am trying to envision the long 45 degree bevel transitioning from the sides to the bottom and my brain is telling me the cutting tip would be very unsupported unless it was a shallow bowl or a plate. Kinda like using a spindle gouge. I certainly cannot argue with the results Mr. Michelsen gets (look at his his work...WOW!) so I am obviously not understanding something.

So, what am I missing?

Steve Kubien

Ajax, Ontario

Re: New Michaelson bowl gouge

#10

Re: The Johannes Michelsen Grind

Bruce McElhaney, Spring Lake, Michigan

>I think I'm missing something also. It's a strange looking grind. Where the sharp edge and shoulder? and how does one keep it sharp? But after recently getting a very nasty, exploding type catch with my Ellsworth grind, I'm ready to try something new. Those kinds of catches tend to make me a bit more timid while turning.

Re: New Michaelson bowl gouge

#11

Re: The Johannes Michelsen Grind

Johannes Michelsen

>Steve & Bruce,I'll try to clairfy a bit although I'm not sure I understand exactly what you are missing. Bring the tool to the wheel with the old bevel--45 degrees-- matching to the wheel then roll /twist the tool just sligthly to do just the very front end of the tip of the tool thenswing to one side to pick up from the grinding you just did on the tip to grind down that side of the tool twisting the tool as you push forward up across the wheel, this push and twist are what make it possible to maintian the 45 with relation to the inside of the flute so the tool cuts the same no matter what the rotation---this also gives the side of the tool a curved face so there is always some bevel rubbing---no catches--at least not like a normall??? grind. Jigs that allow only swinging to each side w/o twisting can only create flat on the side tools w/o 45 degrees on the side but very thin sharp edges that are highly prone to catching. A catch happens when the entire edge sees wood w/o rubbing bevel and the tendancy to get there is because the tool cuuts best right there on the edge of disaster-- the proverbial sweet spot. With my grind it's almost all sweet spot. It is possible to roll my grind far enough to make a catch happen but it's not at all likly that you would ever go that far ---you don't need to.

Re: New Michaelson bowl gouge

#12

Re: New Michaelson bowl gouge

Doug Thompson near Cleveland

>Bill, the 1 inch tool is rolled almost closed like the first picture to shear the wood inside a bowl.

Steve, the small bevel on this grind is all that is needed to control the tool (the cutting edge is supported), matter of fact it's easier to turn with this than a jig grind.

Re: New Michaelson bowl gouge

#13

Thanks for the info.

Steven Kubien

>