JET 1220VS
Mike Cunningham
>A friend is looking, anyone aware of the 1220 in VS being available anywhere?
Thanks
Knowledge You Can Build On — Est. 1998
JET 1220VS
Mike Cunningham
>A friend is looking, anyone aware of the 1220 in VS being available anywhere?
Thanks
Re: JET 1220VS *LINK*
Gordon Seto
>
Jet 1220 VS
Re: JET 1220VS *LINK*
JL
>
Jet 1220VS
Re: Or would a General be suitable? *LINK*
JL
>General has their Maxi-lathe. That is a pretty nice little lathe.
Maxi Lathe
Re: Or would a General be suitable?
Mike Cunningham
>Thanks to both of you. I think she prefers the Jet because of the ability to dial down to 270 rpm.......so they claim.
Mike
Re: Or would a General be suitable?
Keith Tompkins
>HI Mike, I would certainly try the lathe first before buying it....the Jet VS 10" version, rated at 1/2 hp was absolutely powerless, esp. at lower speeds.
Re: Or would a General be suitable?
Gordon Seto
>I won't consider this General. The tool post is on the wrong side of the banjo. When you are turning bowls close to the swing capacity, you can't get the tool rest as close as you would like when hollowing the inside. That would easily create chattering.
Strangely this is the same design flaw as the Grizzly new 12" mini lathe. I think if they have a wood turner in their team, probably they would have caught this mistake.
Jet has a 5 year warranty. I have seen posts about the General International service is not as good as the General from Canada.
Re: JET 1220VS
john lucas
>Mike my friend Bobby Clemons just bought the 1220 non VS and he said he heard that they were going to have the 1220VS at Richmond so I guess it will be on sale in late June. The 1220 non vs is a sweet machine.
Re: Or would a General be suitable?
Mike Cunningham
>Hi Keith,
Thanks for letting me know about the power issue.
She's going to Richmond with us and I'm guessing WMH or whomever will have them there so I'll advise her to hold off and a test drive will be made.
Will you be there? Perhaps we can get together, I haven't seen you since our wood exchange in Albany in '06.
Mike
Re: JET 1220VS
Mike Cunningham
>Thanks John, we'll be there too.
Mike
Re: Or would a General be suitable?
Keith Tompkins
>HI Mike, Yes, I will be there! I will be promoting my bowl gauge at the Packard booth, as I did in Portland. It looks to be a record-setting attendance! See you there.
Re: JET 1220VS
Greg Haugen
>Mike,
I've got a Jet 1220 (non VS) with the Jet stand and Love It!! If the jet lathes are an option, General's shouldn't be. In my opinion, the small lathes by General don't compare to Jet's. Someone mentioned "Grizzly". After the other companies pick their castings out from china, or where ever, Grizzly goes and picks up the rejects. They may look the same but when it comes to quality-they're far apart.
When it comes to price, quality, and service after the purchase Jet can't be beat in my opinion.
Greg H.
Re: JET 1220VS
michael serpa
>Greg; I'm curious about the companies that get first choice on the casting from China or where ever. I've looked through all of my catalogs and can't find another that looks like Grizzly's new 12x20.
If Grizzly's are rejects, made in a ISO 9001 factory, then whoever gets the fist pick must have an excellent product. Or maybe I don't understand what an ISO 9001 factory is.
Michael
Re: JET 1220VS
Greg Haugen
>Michael,
That is partially correct. They have "new" lathes which are better than the "seconds" casting lathes like they're G0624 which is nothing more than the original General Midi Lathe with a Grizzly sticker and black, instead of yellow, plastic belt cover. Or the H8259, which is mostly made of green Jet parts. They are trying to get better, I will admit that, with the "new" line. An interesting side note on these 1220 lathes. I think Grizzly's is the only one with a "digital" read out. It seems the green and white lathes are much better in quality than the "solid" green lathes. Which some still have "General" and "Jet" stands and other parts. Who has the "firsts" on these lathe parts from the older lathes, obviously Jet and General. The whole "ISO" declaration is also overrated.
Greg
Re: JET 1220VS
michael serpa
>Greg; I am refering to the "new" models i.e. GO657 and GO658. The latter in particular. It doesn't seem to be sharing parts with any other lathe. With the digital readout and the outboard ability I believe this lathe is worthy of consideration.
Also I'm very interested in learning more about ISO. Can you direct me to a source?
Thanx Michael
Email Sent
Greg Haugen
>
Re: JET 1220VS
Mike Cunningham
>Thanks Greg, I'll pass along your thoughts and I'm sure she'll test drive one in Richmond.
BTW, that Iles roughing gouge is a dandy, thanks again.
Mike
Re: JET 1220VS
Greg Haugen
>That's Great! Glad you liked it and could use it.
Greg