Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

8" grinder fenders

Posts

8" grinder fenders

#1

8" grinder fenders

Carol - now in NC Nebraska

>I have a wonderful very old Craftsman grinder, given to me by a friend who's Dad got it 50 years ago or more. Great motor with bearings that run on for 3 minutes or more after shutting the motor off. So it is a keeper.

However, I put 8" wheels on it and need the fenders or wheel covers.

So does anyone have a dead 8" grinder and would be willing to let me have the wheel fenders? Any brand ought to do. I am fairly handy making things work. This would save me from fabricating something from scratch.

Thanks. Ideas welcome. BTW, I have already rejected going back to 6" wheels, so please don't go there.

Re: 8" grinder fenders

#2

Traveling tool sale

James McClure

>I bought a really crappy grinder at one of those traveling tool sales once for about $8. It took this thing about 3 minutes to come up to speed and as soon as you touched a tool to the stone it began slowing down again. It had no torque at all. I ended up giving it away. But it was an 8" grinder and it had fenders on it. Just a thought...

We have three or four companies that put on those shows in our area. I know one is called Homier. I can't think of any of the others. I think they have websites.

Re: 8" grinder fenders

#3

Never mind it's $40 now

James McClure

>I just searched for their website and found the grinder that I was talking about. It is listed for $40. What a rip off!

Re: 8" grinder fenders

#4

Re: Traveling tool sale

Randy G

>Okay... I know nothing about motor's so take this for what it's worth. But I had a motor I setup for buffing doing that to me. I added a capacitor to it at the suggestion of a friend and now, starts up fast, runs with load on it, and works great.

Re: 8" grinder fenders

#5

Re: 8" grinder fenders

Wally Dickerman in Arizona

>Carol, I know that you value that old Sears grinder. The Woodcraft 8 inch slow speed grinder is a heck of a buy at $90 or under. I has 2 white AO 1-inch wide wheels. The wheels alone would cost you near the price of the complete grinder.

We used the Woodcraft grinder last week in my shop.

Wally

Re: 8" grinder fenders

#6

Re: 8" grinder fenders

Carol - now in NC Nebraska

>Yup, we did, Wally.

I have the motor and the 8" wheels already. Just wanted to replace the small fenders (which no longer fit) with replacement fenders. I was hoping someone had a dead grinder and would be willing to allow me to recycle the fenders.

One can hope. :)

Re: 8" grinder fenders

#7

Re: 8" grinder fenders

James Fox

>Carol--Just moved to Washington State...Movers dropped my Woodcraft 8 in. grinder and bent the shaft and have to replace it. Have the "fenders" that protect errant fingers from the grinding wheels. You are welcome to them. Please e-mail at james_fox_78232@yahoo.com and I'll send them out.

James

Re: 8" grinder fenders

#8

Re: 8" grinder fenders -WC'ers are wonderful!

Carol - now in NC Nebraska

>Thanks!

Email sent.

Re: 8" grinder fenders

#9

Re: 8" grinder fenders

HeatherA in AK

>have you seen John Jordans video "turning bowls"? He has a need setup that covers the whole thing. Just another idea. I don't think I could do a very good job describing it.

Heather

Re: 8" grinder fenders

#10

Re: 8" grinder fenders

eaglesc

>" I am fairly handy making things work. This would save me from fabricating something from scratch."

Sounds a little oxymoronish