Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Barracuda2 scroll chuck

Posts

Barracuda2 scroll chuck

#1

Barracuda2 scroll chuck

Gary Land

>I am relatively new to turning and would like to get a chuck. I was looking at the Barracuda2 chuck, but an article that I read about the first Barracuda was not positive. It said that the gears in it had broken down after some usage. I was wondering if anyone knows if they had fixed the problem in the Barracuda 2

Re: Barracuda2 scroll chuck

#2

Re: Barracuda2 scroll chuck

Ken George

>I have the Barricuda2 and would not recommend it. I would go for the Grizzly equivalent of the Vicmarc. The Barricuda is poor quality. One of the gears on mine can't be used, it binds so bad that it is useless. It's nice to get the array of jaws that comes with it but IMO it's not worth the money.

Good Luck,

Ken

Re: Barracuda2 scroll chuck

#3

Re: Barracuda2 scroll chuck

dan oliphant

>I have been using the B2 chuck for about the last year, on a daily basis. Not had a single problem with it. I do clean the gears out with compressed air every time I remove it from the lathe, give it a little squirt of WD40 every three or four months (removing any excess) is as smooth now as it was the day I got it.